Hi Mario, Eureka!
I managed to set up the repositories from the live CD, (I forgot to do a Reload before) I installed tvtime. Then I tried tvtime -d /dev/video1. It didn't like that, so I tried video0. Everything worked just fine. You did it! Congratulations! Now, if only I could get the Feisty upgrade to work, we'd be really flying. Thanks again, Maurice Mario Limonciello wrote: > Maurice, > > In an effort to close this bug report if it is indeed just a configuration > issue, could you boot up off of that live cd and follow this: > > 1) Setup universe/multiverse > 2) Install tvtime > 3) tvtime -d /dev/video1 > > If that works, i'll close up this bug, otherwise i'll mark it as open still > and needing further investigation. (It's much better to get this fixed while > feisty is still in development if its a problem, getting bugs fixed after > the release is much more difficult) You won't lose anything in the process > of doing these things in live mode. > > The upgrade will preserve all of your data,passwords, etc. > > Mario > > On 3/26/07, Maurice <[EMAIL PROTECTED]> wrote: > >> Mario, >> >> Thanks. I'm sorry I confused you. When I found I could not get TVTime >> to work with Feisty, I filled the bug report and re-installed Edgy. >> >> I think I'll wait until the final version of Feisty is released, which >> should be pretty soon now, I guess. >> >> Will the upgrade preserve all my data, passwords, etc. etc.? >> >> As soon as I have upgraded I will continue with the bug as you have >> suggested. >> >> Thanks, >> >> Maurice >> >> Mario Limonciello wrote: >> >>> Maurice, >>> >>> >From looking at tvtime's help: >>> >>> [EMAIL PROTECTED]:~/Desktop/ivtv-0.10.1$ tvtime --help >>> >>> >>>> Running tvtime 1.0.2. >>>> Reading configuration from /etc/tvtime/tvtime.xml >>>> usage: tvtime [OPTION]... >>>> >>>> -a, --widescreen 16:9 mode. >>>> -A, --nowidescreen 4:3 mode. >>>> -b, --vbidevice=DEVICE VBI device (defaults to /dev/vbi0). >>>> -c, --channel=CHANNEL Tune to the specified channel on startup. >>>> -d, --device=DEVICE video4linux device (defaults to >>>> >> /dev/video0). >> >>>> >>>> >>> You want the option -d --device=DEVICE. >>> >>> So go ahead and try: >>> >>> tvtime -d /dev/video1 >>> >>> >>> I'm a bit confused - I thought you *were* on Herd5. Is this bug from >>> running on live disk then? >>> >>> I personally think that Feisty Beta is incredibly stable, but take that >>> >> with >> >>> a grain of salt. Unless there is something that you are dying to try in >>> >> it, >> >>> stick with Edgy until Feisty release in case anything happens between >>> >> now >> >>> and then. >>> >>> Regards, >>> >>> Mario >>> >>> On 3/26/07, Maurice <[EMAIL PROTECTED]> wrote: >>> >>> >>>> Mario, >>>> I'm currently using a very stable and excellent Edgy and am reluctant >>>> >> to >> >>>> change to Feisty, unless you think I could do this with the Beta >>>> >> version >> >>>> safely. One other possibility might be to set up a dual boot with Edgy >>>> and Feisty, but I'm not too sure that this is possible. Then it might >>>> be possible to do as you suggested with >>>> >>>> */dev/video1* >>>> >>>> . What do you think? >>>> >>>> Maurice >>>> >>>> Mario Limonciello wrote: >>>> >>>> >>>>> Hi Maurice, >>>>> >>>>> TVTime can't read the pvr-150, but I think I know what's happening >>>>> >> here. >> >>>>> The PVR-150 is being assigned video0 since the ivtv drivers are now in >>>>> >>>>> >>>> the >>>> >>>> >>>>> kernel. Can you start tvtime with /dev/video1 (for your other card) >>>>> instead? >>>>> >>>>> Regards, >>>>> >>>>> Mario >>>>> >>>>> On 3/26/07, Maurice <[EMAIL PROTECTED]> wrote: >>>>> >>>>> >>>>> >>>>>> Hi Mario, >>>>>> >>>>>> Yes, I have a Hauppauge 150 PVR, which came with my computer, an HP >>>>>> Pavillion Media Edition. It is virtually impossible to remove this >>>>>> >>>>>> >>>> with >>>> >>>> >>>>>> doing serious damage to the wiring. With Edgy, TVTime works >>>>>> >> perfectly, >> >>>>>> despite the presence of this other adapter. As I use the TV on my >>>>>> >> box >> >>>>>> on an almost daily basis, I'm reluctant to upgrade to Feisty unless I >>>>>> have assurance that all will be well with TVTime. Or, could it be, >>>>>> >>>>>> >>>> that >>>> >>>> >>>>>> Feisty will be able to read the Hauppage 150 PVR, meaning I could >>>>>> >>>>>> >>>> remove >>>> >>>> >>>>>> the old Hauppauge WinTV adapter that I have added? >>>>>> >>>>>> Maurice >>>>>> >>>>>> Mario Limonciello wrote: >>>>>> >>>>>> >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> Do you currently also have a an IVTV card installed in this machine >>>>>>> >> in >> >>>>>>> addition to the Hauppauge bt878? >>>>>>> >>>>>>> ** Changed in: tvtime (Ubuntu) >>>>>>> Status: Unconfirmed => Needs Info >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> -- >>>>>> I'm using Ubuntu Version 6.10... >>>>>> ubuntu -- linux for human beings <http://www.ubuntu.com> >>>>>> >>>>>> -- >>>>>> TVTime bug with 7.04 Herd 5 >>>>>> https://launchpad.net/bugs/91203 >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>> -- >>>> I'm using Ubuntu Version 6.10... >>>> ubuntu -- linux for human beings <http://www.ubuntu.com> >>>> >>>> -- >>>> TVTime bug with 7.04 Herd 5 >>>> https://launchpad.net/bugs/91203 >>>> >>>> >>>> >>> >>> >> -- >> I'm using Ubuntu Version 6.10... >> ubuntu -- linux for human beings <http://www.ubuntu.com> >> >> -- >> TVTime bug with 7.04 Herd 5 >> https://launchpad.net/bugs/91203 >> >> > > > -- TVTime bug with 7.04 Herd 5 https://launchpad.net/bugs/91203 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
