i check the directories of only hte kernel 2.6.32.23-generic I have not being able to make the sound work again. I have rebooted so many times and now it does not work anymore. Here is the output of dsmeg
[ 0.215553] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11 [ 0.215738] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 0.215923] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11 [ 0.216115] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10 [ 0.216300] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10 [ 0.216485] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled. [ 0.216670] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11 [ 0.216855] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5 [ 0.217040] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10 [ 0.217225] ACPI: PCI Interrupt Link [LPMU] (IRQs *11) [ 0.217340] vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none [ 0.217348] vgaarb: loaded [ 0.217465] SCSI subsystem initialized [ 0.217564] libata version 3.00 loaded. [ 0.217637] usbcore: registered new interface driver usbfs [ 0.217653] usbcore: registered new interface driver hub [ 0.217682] usbcore: registered new device driver usb [ 0.217846] ACPI: WMI: Mapper loaded [ 0.217848] PCI: Using ACPI for IRQ routing [ 0.218002] NetLabel: Initializing [ 0.218004] NetLabel: domain hash size = 128 [ 0.218006] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.218019] NetLabel: unlabeled traffic allowed by default [ 0.218053] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.218059] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.228037] Switching to clocksource hpet [ 0.229929] AppArmor: AppArmor Filesystem Enabled [ 0.229948] pnp: PnP ACPI init [ 0.229966] ACPI: bus type pnp registered [ 0.232954] pnp: PnP ACPI: found 12 devices [ 0.232957] ACPI: ACPI bus type pnp unregistered [ 0.232960] PnPBIOS: Disabled by ACPI PNP [ 0.232973] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved [ 0.232979] system 00:03: ioport range 0x1000-0x107f has been reserved [ 0.232983] system 00:03: ioport range 0x1080-0x10ff has been reserved [ 0.232986] system 00:03: ioport range 0x1400-0x147f has been reserved [ 0.232989] system 00:03: ioport range 0x1480-0x14ff has been reserved [ 0.232992] system 00:03: ioport range 0x1800-0x187f has been reserved [ 0.232995] system 00:03: ioport range 0x1880-0x18ff has been reserved [ 0.233002] system 00:04: ioport range 0x360-0x361 has been reserved [ 0.233005] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.233014] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.233018] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.233021] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.233025] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.233028] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved [ 0.267740] pci 0000:00:08.0: PCI bridge, secondary bus 0000:02 [ 0.267742] pci 0000:00:08.0: IO window: disabled [ 0.267747] pci 0000:00:08.0: MEM window: 0xf6100000-0xf61fffff [ 0.267750] pci 0000:00:08.0: PREFETCH window: disabled [ 0.267754] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 [ 0.267757] pci 0000:00:0c.0: IO window: 0x4000-0x4fff [ 0.267761] pci 0000:00:0c.0: MEM window: 0xf2000000-0xf3ffffff [ 0.267764] pci 0000:00:0c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff [ 0.267769] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03 [ 0.267771] pci 0000:00:0d.0: IO window: disabled [ 0.267774] pci 0000:00:0d.0: MEM window: 0xf6000000-0xf60fffff [ 0.267777] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.267785] pci 0000:00:08.0: setting latency timer to 64 [ 0.267791] pci 0000:00:0c.0: setting latency timer to 64 [ 0.267797] pci 0000:00:0d.0: setting latency timer to 64 [ 0.267801] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.267804] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.267807] pci_bus 0000:02: resource 1 mem: [0xf6100000-0xf61fffff] [ 0.267810] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.267812] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.267815] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] [ 0.267818] pci_bus 0000:04: resource 1 mem: [0xf2000000-0xf3ffffff] [ 0.267821] pci_bus 0000:04: resource 2 pref mem [0xf0000000-0xf1ffffff] [ 0.267824] pci_bus 0000:03: resource 1 mem: [0xf6000000-0xf60fffff] [ 0.267861] NET: Registered protocol family 2 [ 0.267956] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.268311] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.268943] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.269270] TCP: Hash tables configured (established 131072 bind 65536) [ 0.269273] TCP reno registered [ 0.269362] NET: Registered protocol family 1 [ 0.269514] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.269568] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.269629] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.269693] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.269761] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.269768] pci 0000:00:12.0: Boot video device [ 0.269806] Simple Boot Flag at 0x36 set to 0x1 [ 0.269979] cpufreq-nforce2: No nForce2 chipset. [ 0.270005] Scanning for low memory corruption every 60 seconds [ 0.270131] audit: initializing netlink socket (disabled) [ 0.270142] type=2000 audit(1278092081.269:1): initialized [ 0.280376] highmem bounce pool size: 64 pages [ 0.280382] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.281963] VFS: Disk quotas dquot_6.5.2 [ 0.282026] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.282590] fuse init (API version 7.13) [ 0.282677] msgmni has been set to 1682 [ 0.282901] alg: No test for stdrng (krng) [ 0.282956] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.282959] io scheduler noop registered [ 0.282961] io scheduler anticipatory registered [ 0.282963] io scheduler deadline registered [ 0.283002] io scheduler cfq registered (default) [ 0.283137] alloc irq_desc for 24 on node -1 [ 0.283140] alloc kstat_irqs on node -1 [ 0.283148] pcieport 0000:00:0c.0: irq 24 for MSI/MSI-X [ 0.283154] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.283227] alloc irq_desc for 25 on node -1 [ 0.283229] alloc kstat_irqs on node -1 [ 0.283234] pcieport 0000:00:0d.0: irq 25 for MSI/MSI-X [ 0.283238] pcieport 0000:00:0d.0: setting latency timer to 64 [ 0.283294] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.283318] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.283863] ACPI: AC Adapter [ACAD] (on-line) [ 0.283948] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.283952] ACPI: Sleep Button [SLPB] [ 0.283998] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.284279] ACPI: Lid Switch [LID] [ 0.284340] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.284343] ACPI: Power Button [PWRB] [ 0.284388] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.284390] ACPI: Power Button [PWRF] [ 0.284719] ACPI: processor limited to max C-state 1 [ 0.284742] processor LNXCPU:00: registered as cooling_device0 [ 0.284841] processor LNXCPU:01: registered as cooling_device1 [ 0.288390] ACPI Exception: AE_OK, No or invalid critical threshold (20090903/thermal-386) [ 0.288521] isapnp: Scanning for PnP cards... [ 0.290016] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.291301] brd: module loaded [ 0.291774] loop: module loaded [ 0.291865] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.292044] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.292387] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 0.292393] alloc irq_desc for 23 on node -1 [ 0.292395] alloc kstat_irqs on node -1 [ 0.292405] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 0.292423] pata_acpi 0000:00:09.0: setting latency timer to 64 [ 0.292430] pata_acpi 0000:00:09.0: PCI INT A disabled [ 0.292736] Fixed MDIO Bus: probed [ 0.292772] PPP generic driver version 2.4.2 [ 0.292813] tun: Universal TUN/TAP device driver, 1.6 [ 0.292815] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> [ 0.292897] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.293230] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 0.293233] alloc irq_desc for 22 on node -1 [ 0.293235] alloc kstat_irqs on node -1 [ 0.293243] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22 [ 0.293257] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.293260] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.293296] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.293319] ehci_hcd 0000:00:02.1: debug port 1 [ 0.293327] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.293347] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000 [ 0.305332] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.305469] usb usb1: configuration #1 chosen from 1 choice [ 0.305498] hub 1-0:1.0: USB hub found [ 0.305509] hub 1-0:1.0: 7 ports detected [ 0.305900] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22 [ 0.305906] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ 22 [ 0.305923] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.305927] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.305976] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 0.305999] ehci_hcd 0000:00:04.1: debug port 1 [ 0.306007] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 0.306015] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400 [ 0.317069] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.317197] usb usb2: configuration #1 chosen from 1 choice [ 0.317231] hub 2-0:1.0: USB hub found [ 0.317241] hub 2-0:1.0: 2 ports detected [ 0.317298] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.317640] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 [ 0.317644] alloc irq_desc for 18 on node -1 [ 0.317647] alloc kstat_irqs on node -1 [ 0.317657] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18 [ 0.317676] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.317680] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.317720] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.317753] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000 [ 0.375409] usb usb3: configuration #1 chosen from 1 choice [ 0.375439] hub 3-0:1.0: USB hub found [ 0.375450] hub 3-0:1.0: 7 ports detected [ 0.375819] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18 [ 0.375825] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z018] -> GSI 18 (level, low) -> IRQ 18 [ 0.375843] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.375846] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.375888] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 0.375905] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000 [ 0.431217] usb usb4: configuration #1 chosen from 1 choice [ 0.431249] hub 4-0:1.0: USB hub found [ 0.431261] hub 4-0:1.0: 2 ports detected [ 0.431320] uhci_hcd: USB Universal Host Controller Interface driver [ 0.431407] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.467759] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.467775] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.467893] mice: PS/2 mouse device common for all mice [ 0.468047] rtc_cmos 00:07: RTC can wake from S4 [ 0.468087] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.468125] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.468241] device-mapper: uevent: version 1.0.3 [ 0.507486] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.511286] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 0.529184] device-mapper: multipath: version 1.1.0 loaded [ 0.529189] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.535443] EISA: Probing bus 0 at eisa.0 [ 0.535450] Cannot allocate resource for EISA slot 1 [ 0.535455] Cannot allocate resource for EISA slot 3 [ 0.535458] Cannot allocate resource for EISA slot 4 [ 0.535471] EISA: Detected 0 cards. [ 0.549255] cpuidle: using governor ladder [ 0.549258] cpuidle: using governor menu [ 0.549746] TCP cubic registered [ 0.549914] NET: Registered protocol family 10 [ 0.550374] lo: Disabled Privacy Extensions [ 0.550698] NET: Registered protocol family 17 [ 0.550735] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00) [ 0.550777] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x12 [ 0.550780] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13 [ 0.550782] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14 [ 0.550785] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e [ 0.554586] Using IPI No-Shortcut mode [ 0.554686] PM: Resume from disk failed. [ 0.554705] registered taskstats version 1 [ 0.555039] Magic number: 2:986:591 [ 0.555135] rtc_cmos 00:07: setting system clock to 2010-07-02 17:34:42 UTC (1278092082) [ 0.555139] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.555141] EDD information not available. [ 0.566740] Freeing initrd memory: 12834k freed [ 0.629354] ACPI: Battery Slot [BAT0] (battery present) [ 0.641945] isapnp: No Plug & Play device found [ 0.896429] Freeing unused kernel memory: 660k freed [ 0.896903] Write protecting the kernel text: 4680k [ 0.896942] Write protecting the kernel read-only data: 1840k [ 0.917991] udev: starting version 151 [ 0.988207] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.988549] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 0.988555] alloc irq_desc for 20 on node -1 [ 0.988557] alloc kstat_irqs on node -1 [ 0.988568] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20 [ 0.988573] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.046708] vga16fb: initializing [ 1.046713] vga16fb: mapped to 0xc00a0000 [ 1.046777] fb0: VGA16 VGA frame buffer device [ 1.065545] acpi device:23: registered as cooling_device2 [ 1.065866] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 1.065945] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 1.071023] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 1.071038] ohci1394 0000:02:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ 5 [ 1.112043] usb 2-2: new high speed USB device using ehci_hcd and address 2 [ 1.129068] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.253129] usb 2-2: configuration #1 chosen from 1 choice [ 1.267795] Console: switching to colour frame buffer device 80x30 [ 1.509091] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:09:2b:e8 [ 1.509096] forcedeth 0000:00:0a.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 1.509121] pata_amd 0000:00:06.0: version 0.4.1 [ 1.509168] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.509296] scsi0 : pata_amd [ 1.509460] scsi1 : pata_amd [ 1.509860] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 1.509863] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 1.509897] ahci 0000:00:09.0: version 3.0 [ 1.509908] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 1.509946] alloc irq_desc for 26 on node -1 [ 1.509949] alloc kstat_irqs on node -1 [ 1.509957] ahci 0000:00:09.0: irq 26 for MSI/MSI-X [ 1.509963] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ [ 1.510022] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 1.510027] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio slum part [ 1.510031] ahci 0000:00:09.0: setting latency timer to 64 [ 1.510440] scsi2 : ahci [ 1.510570] scsi3 : ahci [ 1.510636] scsi4 : ahci [ 1.510694] scsi5 : ahci [ 1.510826] ata3: SATA max UDMA/133 abar m8...@0xf6484000 port 0xf6484100 irq 26 [ 1.510830] ata4: SATA max UDMA/133 abar m8...@0xf6484000 port 0xf6484180 irq 26 [ 1.510833] ata5: SATA max UDMA/133 abar m8...@0xf6484000 port 0xf6484200 irq 26 [ 1.510836] ata6: SATA max UDMA/133 abar m8...@0xf6484000 port 0xf6484280 irq 26 [ 1.688310] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2 [ 1.688338] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) [ 1.720271] ata1.00: configured for MWDMA2 [ 1.726079] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632N 0503 PQ: 0 ANSI: 5 [ 1.738095] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.738099] Uniform CD-ROM driver Revision: 3.20 [ 1.738212] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.738281] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.738360] ata2: port disabled. ignoring. [ 1.828031] ata4: SATA link down (SStatus 0 SControl 300) [ 1.828048] ata5: SATA link down (SStatus 0 SControl 300) [ 1.828067] ata6: SATA link down (SStatus 0 SControl 300) [ 1.992026] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.992413] ata3.00: ATA-8: WDC WD2500BEVS-60UST0, 01.01A01, max UDMA/100 [ 1.992417] ata3.00: 488397168 sectors, multi 16: LBA48 [ 1.992894] ata3.00: configured for UDMA/100 [ 1.992982] scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVS-6 01.0 PQ: 0 ANSI: 5 [ 1.993171] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.993241] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.993294] sd 2:0:0:0: [sda] Write Protect is off [ 1.993298] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.993323] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.993462] sda: sda1 sda2 < sda5 > [ 2.062006] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.404220] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b008852ac00] [ 2.556558] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 4.842569] Adding 5847620k swap on /dev/sda5. Priority:-1 extents:1 across:5847620k [ 7.186352] udev: starting version 151 [ 9.092795] lp: driver loaded but no devices found [ 9.161593] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 9.175756] Linux video capture interface: v2.00 [ 9.219881] sdhci: Secure Digital Host Controller Interface driver [ 9.219884] sdhci: Copyright(c) Pierre Ossman [ 9.222094] sdhci-pci 0000:02:05.1: SDHCI controller found [1180:0822] (rev 22) [ 9.222478] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 9.222492] sdhci-pci 0000:02:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7 [ 9.224891] Registered led device: mmc0:: [ 9.225994] mmc0: SDHCI controller on PCI [0000:02:05.1] using PIO [ 9.511126] ricoh-mmc: Ricoh MMC Controller disabling driver [ 9.511130] ricoh-mmc: Copyright(c) Philip Langdale [ 9.511156] ricoh-mmc: Ricoh MMC controller found at 0000:02:05.2 [1180:0843] (rev 12) [ 9.511170] ricoh-mmc: Controller is now disabled. [ 9.513369] cfg80211: Calling CRDA to update world regulatory domain [ 9.517695] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a110) [ 9.520510] input: HP Webcam as /devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/input/input7 [ 9.520611] usbcore: registered new interface driver uvcvideo [ 9.520651] USB Video Class driver (v0.1.0) [ 9.531820] Linux agpgart interface v0.103 [ 10.127364] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 10.207622] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 10.511409] nvidia: module license 'NVIDIA' taints kernel. [ 10.511414] Disabling lock debugging due to kernel taint [ 10.875455] type=1505 audit(1278092092.816:2): operation="profile_load" pid=614 name="/sbin/dhclient3" [ 10.875742] type=1505 audit(1278092092.816:3): operation="profile_load" pid=614 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.875900] type=1505 audit(1278092092.816:4): operation="profile_load" pid=614 name="/usr/lib/connman/scripts/dhclient-script" [ 10.907154] cfg80211: World regulatory domain updated: [ 10.907158] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.907162] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.907165] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.907168] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.907171] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.907174] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.624780] i2c i2c-0: nForce2 SMBus adapter at 0x3040 [ 11.624807] i2c i2c-1: nForce2 SMBus adapter at 0x3000 [ 11.872874] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16 [ 11.872881] alloc irq_desc for 16 on node -1 [ 11.872883] alloc kstat_irqs on node -1 [ 11.872894] nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ 16 [ 11.872901] nvidia 0000:00:12.0: setting latency timer to 64 [ 11.872906] vgaarb: device changed decodes: PCI:0000:00:12.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 11.873261] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010 [ 11.934304] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 11.934310] alloc irq_desc for 19 on node -1 [ 11.934313] alloc kstat_irqs on node -1 [ 11.934324] ath5k 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19 [ 11.934333] ath5k 0000:03:00.0: setting latency timer to 64 [ 11.934371] ath5k 0000:03:00.0: registered as 'phy0' [ 11.939539] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.430054] ath: EEPROM regdomain: 0x64 [ 12.430058] ath: EEPROM indicates we should expect a direct regpair map [ 12.430064] ath: Country alpha2 being used: 00 [ 12.430066] ath: Regpair used: 0x64 [ 12.583806] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 12.584475] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 12.584478] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 12.584481] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 12.599250] phy0: Selected rate control algorithm 'minstrel' [ 12.600089] Registered led device: ath5k-phy0::rx [ 12.600110] Registered led device: ath5k-phy0::tx [ 12.600114] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 13.335470] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 16.051125] type=1505 audit(1278092097.992:5): operation="profile_load" pid=1066 name="/usr/share/gdm/guest-session/Xsession" [ 16.053084] type=1505 audit(1278092097.996:6): operation="profile_replace" pid=1067 name="/sbin/dhclient3" [ 16.053383] type=1505 audit(1278092097.996:7): operation="profile_replace" pid=1067 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 16.053548] type=1505 audit(1278092097.996:8): operation="profile_replace" pid=1067 name="/usr/lib/connman/scripts/dhclient-script" [ 16.322511] type=1505 audit(1278092098.264:9): operation="profile_load" pid=1068 name="/usr/bin/evince" [ 16.326262] type=1505 audit(1278092098.268:10): operation="profile_load" pid=1068 name="/usr/bin/evince-previewer" [ 16.328663] type=1505 audit(1278092098.272:11): operation="profile_load" pid=1068 name="/usr/bin/evince-thumbnailer" [ 16.360886] type=1505 audit(1278092098.304:12): operation="profile_load" pid=1073 name="/usr/bin/freshclam" [ 16.395921] alloc irq_desc for 27 on node -1 [ 16.395926] alloc kstat_irqs on node -1 [ 16.395936] forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X [ 16.396135] eth0: no link during initialization. [ 16.396738] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.408606] type=1505 audit(1278092098.352:13): operation="profile_load" pid=1074 name="/usr/lib/cups/backend/cups-pdf" [ 16.408971] type=1505 audit(1278092098.352:14): operation="profile_load" pid=1074 name="/usr/sbin/cupsd" [ 16.477355] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.310558] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 21.310563] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 21.310565] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 21.310566] vboxdrv: the usage of hardware performance counters by [ 21.310567] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 21.310572] vboxdrv: Found 2 processor cores. [ 21.310789] vboxdrv: fAsync=1 offMin=0xea9e1 offMax=0xea9e1 [ 21.311515] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 21.311519] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001). [ 21.646510] ppdev: user-space parallel port driver [ 41.427891] padlock: VIA PadLock not detected. [ 51.414678] wlan0: direct probe to AP 00:1a:c4:c4:10:11 (try 1) [ 51.414704] wlan0: deauthenticating from 00:1a:c4:c4:10:11 by local choice (reason=3) [ 51.414752] wlan0: direct probe to AP 00:1a:c4:c4:10:11 (try 1) [ 51.416729] wlan0: direct probe responded [ 51.416735] wlan0: authenticate with AP 00:1a:c4:c4:10:11 (try 1) [ 51.419966] wlan0: authenticated [ 51.419985] wlan0: associate with AP 00:1a:c4:c4:10:11 (try 1) [ 51.421754] wlan0: RX AssocResp from 00:1a:c4:c4:10:11 (capab=0x431 status=0 aid=1) [ 51.421758] wlan0: associated [ 51.422447] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 51.436058] cfg80211: Calling CRDA for country: US [ 51.438231] cfg80211: Received country IE: [ 51.438234] cfg80211: Regulatory domain: US [ 51.438236] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 51.438240] (2402000 KHz - 2477000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm) [ 51.438242] cfg80211: CRDA thinks this should applied: [ 51.438244] cfg80211: Regulatory domain: US [ 51.438246] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 51.438249] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 51.438252] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 51.438255] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 51.438257] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 51.438260] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 51.438263] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 51.438265] cfg80211: We intersect both of these and get: [ 51.438267] cfg80211: Regulatory domain: 98 [ 51.438268] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 51.438271] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 51.438277] cfg80211: Disabling channel 2467 MHz on phy0 due to Country IE [ 51.438279] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE [ 51.438282] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE [ 51.438287] cfg80211: Current regulatory domain updated by AP to: US [ 51.438289] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 51.438291] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 62.024034] wlan0: no IPv6 routers present [ 85.504044] Clocksource tsc unstable (delta = -169786384 ns) erne...@ernesto-laptop:~$ -- Sound just stopped working completely. It used to work before. https://bugs.launchpad.net/bugs/600041 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
