Without any change when reboot:
maxim...@maximiliano:~$ sudo ethtool -i eth0 driver: tulip version: 1.1.15-NAPI firmware-version: bus-info: 0000:01:0a.0 maxim...@maximiliano:~$ sudo mii-tool eth0: negotiated 100baseTx-FD, link ok maxim...@maximiliano:~$ sudo mii-diag Using the default interface 'eth0'. Basic registers of MII PHY #1: 1000 782d 0181 b841 01e1 4de1 0001 0000. The autonegotiated capability is 01e0. The autonegotiated media type is 100baseTx-FD. Basic mode control register 0x1000: Auto-negotiation enabled. You have link beat, and everything is working OK. Your link partner advertised 4de1: Flow-control 100baseTx-FD 100baseTx 10baseT-FD 10baseT, w/ 802.3X flow control. End of basic transceiver information. -- tulip driver doesn't work for Davicom https://bugs.launchpad.net/bugs/45860 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
