hi, when i reboot my machine all times tulip and dmfe load, but i have
tulip on blacklist on /etc/modprobe.d/blacklist.conf
maxim...@maximiliano:~$ cat /etc/modprobe.d/blacklist.conf
# This file lists modules which will not be loaded as the result of
# alias expansion, with the purpose of preventing the hotplug subsystem
# to load them. It does not affect autoloading of modules by the kernel.
# This file is provided by the udev package.
# This directive blacklists all devices which are members of the display class.
# It has the main effect of preventing udev from autoloading the fb drivers.
# vendor, device, subsystem_vendor, subsystem_device, class, class, class
install pci:v*d*sv*sd*bc03sc*i* /bin/true
# evbug is a debug tool and should be loaded explicitly
blacklist evbug
# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd
# replaced by e100
blacklist eepro100
blacklist tulip
# replaced by tulip
blacklist tulip
blacklist de4x5
# replaced by tmscsim
blacklist am53c974
# watchdog drivers should be loaded only if a watchdog daemon is installed
blacklist acquirewdt
blacklist advantechwdt
blacklist alim1535_wdt
blacklist alim7101_wdt
blacklist booke_wdt
blacklist cpu5wdt
blacklist eurotechwdt
blacklist hpwdt
blacklist i6300esb
blacklist i8xx_tco
blacklist ib700wdt
blacklist ibmasr
blacklist indydog
blacklist ixp2000_wdt
blacklist ixp4xx_wdt
blacklist it8712f_wdt
blacklist iTCO_wdt
blacklist machzwd
blacklist mixcomwd
blacklist mpc8xx_wdt
blacklist mpcore_wdt
blacklist mv64x60_wdt
blacklist pc87413_wdt
blacklist pcwd
blacklist pcwd_pci
blacklist pcwd_usb
blacklist s3c2410_wdt
blacklist sa1100_wdt
blacklist sbc60xxwdt
blacklist sbc7240_wdt
blacklist sbc8360
blacklist sbc_epx_c3
blacklist sc1200wdt
blacklist sc520_wdt
blacklist scx200_wdt
blacklist shwdt
blacklist smsc37b787_wdt
blacklist softdog
blacklist w83627hf_wdt
blacklist w83697hf_wdt
blacklist w83877f_wdt
blacklist w83977f_wdt
blacklist wafer5823wdt
blacklist wdt285
blacklist wdt977
blacklist wdt
blacklist wdt_pci
here i'm needed to make:
rmmod tulip dmfe
modprobe dmfe
and when i put this commands i get "Operation not Supported"...
maxim...@maximiliano:~$ uname -a
Linux Maximiliano 2.6.29-1-686 #1 SMP Fri Apr 17 14:35:16 UTC 2009 i686
GNU/Linux
maxim...@maximiliano:~$ sudo mii-diag
Using the default interface 'eth0'.
SIOCGMIIPHY on eth0 failed: Operation not supported
maxim...@maximiliano:~$ sudo mii-tool
SIOCGMIIPHY on 'eth0' failed: Operation not supported
no MII interfaces found
maxim...@maximiliano:~$ sudo ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:08:a1:82:31:32
inet addr:192.168.0.69 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::208:a1ff:fe82:3132/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:85929 errors:0 dropped:0 overruns:0 frame:0
TX packets:67706 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:103663813 (98.8 MiB) TX bytes:8964632 (8.5 MiB)
Interrupt:18 Base address:0xac00
--
tulip driver doesn't work for Davicom
https://bugs.launchpad.net/bugs/45860
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
