It looks like foo2zjs may be trying to download firmware during the print... try uninstalling it.
On Sun, May 3, 2009 at 10:35 AM, wojosockie <redrubberchic...@yahoo.com>wrote: > I don't know if this helps, but I have had the same problem as described > in many other bugs similar to this person. I have a recently updated > Ubuntu 9.04 install with a HP LaserJet P1006 printer (USB). I cannot > get this to work. It says that it is installed automatically, and > sometimes prints a test page, but doesn't work or says communications > don't work when attempting to print a page. > > I went to: https://wiki.ubuntu.com/DebuggingPrintingProblems > > this is the output of doing what that page asks. > > mich...@munin:~$ lsb | grep usb > bash: lsb: command not found > mich...@munin:~$ lsmod | grep usb > usblp 20224 0 > usbhid 42336 0 > usb_storage 82880 0 > mich...@munin:~$ tail -f /var/log/messages > May 3 12:13:48 Munin kernel: [ 31.956835] Bridge firewalling registered > May 3 12:13:52 Munin kernel: [ 35.589709] agpgart-intel 0000:00:00.0: > AGP 3.0 bridge > May 3 12:13:52 Munin kernel: [ 35.589728] agpgart-intel 0000:00:00.0: > putting AGP V3 device into 8x mode > May 3 12:13:52 Munin kernel: [ 35.589771] nvidia 0000:01:00.0: putting > AGP V3 device into 8x mode > May 3 12:13:53 Munin kernel: [ 36.759013] ADDRCONF(NETDEV_UP): eth0: > link is not ready > May 3 12:13:53 Munin kernel: [ 36.878117] e1000: eth0: e1000_watchdog: > NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX > May 3 12:13:53 Munin kernel: [ 36.878320] ADDRCONF(NETDEV_CHANGE): eth0: > link becomes ready > May 3 12:15:09 Munin pulseaudio[3610]: alsa-util.c: Cannot find fallback > mixer control "PCM" or mixer control is no combination of switch/volume. > May 3 12:15:09 Munin pulseaudio[3610]: alsa-util.c: Cannot find fallback > mixer control "Mic" or mixer control is no combination of switch/volume. > May 3 12:26:49 Munin kernel: [ 813.481483] usb 1-1: USB disconnect, > address 2 > May 3 12:27:56 Munin kernel: [ 880.356051] usb 1-1: new high speed USB > device using ehci_hcd and address 7 > May 3 12:27:56 Munin logger: loading hp_laserjet_p1006 firmware 001 007 > May 3 12:27:56 Munin kernel: [ 880.508206] usb 1-1: configuration #1 > chosen from 1 choice > May 3 12:27:56 Munin kernel: [ 880.510983] usblp0: USB Bidirectional > printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3E17 > May 3 12:27:57 Munin /etc/hotplug/usb/hpljP1006: foo2zjs: loading HP > LaserJet P1006 firmware /usr/share/foo2xqx/firmware/sihpP1006.dl to > /dev/usb/lp0 ... > May 3 12:28:00 Munin kernel: [ 883.974930] usblp0: nonzero write bulk > status received: -108 > May 3 12:28:00 Munin kernel: [ 883.975321] usblp0: removed > May 3 12:28:00 Munin /etc/hotplug/usb/hpljP1006: foo2zjs: ... download > failed. > ^C > mich...@munin:~$ lpinfo -v > network socket > network beh > direct hal > direct hpfax > direct hp:/usb/HP_LaserJet_P1006?serial=AC1TR9V > network http > network ipp > network lpd > direct parallel:/dev/lp0 > direct scsi > serial serial:/dev/ttyS0?baud=115200 > network smb > mich...@munin:~$ > > How do I get this working? or what do I do from here? > > Thank you for your help. > > -- > HP LaserJet P1005 unusable in 8.04 and 9.04 > https://bugs.launchpad.net/bugs/363522 > You received this bug notification because you are a member of HP Linux > Imaging and Printing, which is subscribed to HPLIP. > -- HP LaserJet P1005 unusable in 8.04 and 9.04 https://bugs.launchpad.net/bugs/363522 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
