I don't know if this helps, but I have had the same problem as described in many other bugs similar to this person. I have a recently updated Ubuntu 9.04 install with a HP LaserJet P1006 printer (USB). I cannot get this to work. It says that it is installed automatically, and sometimes prints a test page, but doesn't work or says communications don't work when attempting to print a page.
I went to: https://wiki.ubuntu.com/DebuggingPrintingProblems this is the output of doing what that page asks. mich...@munin:~$ lsb | grep usb bash: lsb: command not found mich...@munin:~$ lsmod | grep usb usblp 20224 0 usbhid 42336 0 usb_storage 82880 0 mich...@munin:~$ tail -f /var/log/messages May 3 12:13:48 Munin kernel: [ 31.956835] Bridge firewalling registered May 3 12:13:52 Munin kernel: [ 35.589709] agpgart-intel 0000:00:00.0: AGP 3.0 bridge May 3 12:13:52 Munin kernel: [ 35.589728] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode May 3 12:13:52 Munin kernel: [ 35.589771] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode May 3 12:13:53 Munin kernel: [ 36.759013] ADDRCONF(NETDEV_UP): eth0: link is not ready May 3 12:13:53 Munin kernel: [ 36.878117] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX May 3 12:13:53 Munin kernel: [ 36.878320] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready May 3 12:15:09 Munin pulseaudio[3610]: alsa-util.c: Cannot find fallback mixer control "PCM" or mixer control is no combination of switch/volume. May 3 12:15:09 Munin pulseaudio[3610]: alsa-util.c: Cannot find fallback mixer control "Mic" or mixer control is no combination of switch/volume. May 3 12:26:49 Munin kernel: [ 813.481483] usb 1-1: USB disconnect, address 2 May 3 12:27:56 Munin kernel: [ 880.356051] usb 1-1: new high speed USB device using ehci_hcd and address 7 May 3 12:27:56 Munin logger: loading hp_laserjet_p1006 firmware 001 007 May 3 12:27:56 Munin kernel: [ 880.508206] usb 1-1: configuration #1 chosen from 1 choice May 3 12:27:56 Munin kernel: [ 880.510983] usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3E17 May 3 12:27:57 Munin /etc/hotplug/usb/hpljP1006: foo2zjs: loading HP LaserJet P1006 firmware /usr/share/foo2xqx/firmware/sihpP1006.dl to /dev/usb/lp0 ... May 3 12:28:00 Munin kernel: [ 883.974930] usblp0: nonzero write bulk status received: -108 May 3 12:28:00 Munin kernel: [ 883.975321] usblp0: removed May 3 12:28:00 Munin /etc/hotplug/usb/hpljP1006: foo2zjs: ... download failed. ^C mich...@munin:~$ lpinfo -v network socket network beh direct hal direct hpfax direct hp:/usb/HP_LaserJet_P1006?serial=AC1TR9V network http network ipp network lpd direct parallel:/dev/lp0 direct scsi serial serial:/dev/ttyS0?baud=115200 network smb mich...@munin:~$ How do I get this working? or what do I do from here? Thank you for your help. -- HP LaserJet P1005 unusable in 8.04 and 9.04 https://bugs.launchpad.net/bugs/363522 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
