Yes, the installer works just fine. This is after a fresh install. No tweaks have been done. Downloaded the Alt Install 64bit CD ISO. Boot from it, run through the installer, reboot, blam. The CD is ok as I can install AMD 64bit systems and it works great with no problems.
On first login I try to run apt - libcrypto.9.8 bad ELF header and when I try ftp, libreadline bad ELF header. Pico/nano works ok. Here's dmesg: [ 0.000000] Bootdata ok (command line is root=/dev/sda2 ro quiet splash) [ 0.000000] Linux version 2.6.15-23-amd64-generic ([EMAIL PROTECTED]) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Tue May 23 13:45:47 UTC 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff70000 (usable) [ 0.000000] BIOS-e820: 000000007ff70000 - 000000007ff78000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff78000 - 000000007ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f5d40 [ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000007ff72f92 [ 0.000000] ACPI: FADT (v001 INTEL LINDHRST 0x06040000 PTL 0x00000003) @ 0x000000007ff77e2c [ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000007ff77ea0 [ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000007ff77f48 [ 0.000000] ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x000000007ff77f70 [ 0.000000] ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x000000007ff77fc0 [ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x000000007ff72fce [ 0.000000] ACPI: DSDT (v001 Intel LINDHRST 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007ff70000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff70000 [ 0.000000] On node 0 totalpages: 515952 [ 0.000000] DMA zone: 3014 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 512938 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages, LIFO batch:0 [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) [ 0.000000] Processor #6 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) [ 0.000000] Processor #7 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec80000] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 4, version 32, address 0xfec80000, GSI 48-71 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec80400] gsi_base[72]) [ 0.000000] IOAPIC[3]: apic_id 5, version 32, address 0xfec80400, GSI 72-95 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] Checking aperture... [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/sda2 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes) [ 0.000000] time.c: Using 3.579545 MHz PM timer. [ 0.000000] time.c: Detected 3000.256 MHz processor. [ 40.127043] Console: colour VGA+ 80x25 [ 40.128544] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 40.130681] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 40.152211] Memory: 2053232k/2096576k available (2139k kernel code, 42940k reserved, 754k data, 180k init) [ 40.211373] Calibrating delay using timer specific routine.. 6006.18 BogoMIPS (lpj=3003090) [ 40.211434] Security Framework v1.0.0 initialized [ 40.211441] SELinux: Disabled at boot. [ 40.211467] Mount-cache hash table entries: 256 [ 40.211598] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 40.211601] CPU: L2 cache: 1024K [ 40.211605] using mwait in idle threads. [ 40.211608] CPU: Physical Processor ID: 0 [ 40.211619] CPU0: Thermal monitoring enabled (TM1) [ 40.211624] mtrr: v2.0 (20020519) [ 40.211635] SMP alternatives: switching to UP code [ 40.212024] checking if image is initramfs... it is [ 40.929634] Freeing initrd memory: 7102k freed [ 40.936305] ACPI: Looking for DSDT ... not found! [ 40.948797] Using local APIC timer interrupts. [ 40.982101] Detected 12.501 MHz APIC timer. [ 40.982248] SMP alternatives: switching to SMP code [ 40.982501] Booting processor 1/4 APIC 0x6 [ 40.992881] Initializing CPU#1 [ 41.053447] Calibrating delay using timer specific routine.. 5999.39 BogoMIPS (lpj=2999696) [ 41.053459] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 41.053461] CPU: L2 cache: 1024K [ 41.053465] CPU: Physical Processor ID: 3 [ 41.053476] CPU1: Thermal monitoring enabled (TM1) [ 41.053706] Intel(R) Xeon(TM) CPU 3.00GHz stepping 01 [ 41.053715] APIC error on CPU1: 00(40) [ 41.053718] CPU 1: Syncing TSC to CPU 0. [ 41.053904] CPU 1: synchronized TSC with CPU 0 (last diff -57 cycles, maxerr 1140 cycles) [ 41.053977] SMP alternatives: switching to SMP code [ 41.054027] Booting processor 2/4 APIC 0x1 [ 41.064434] Initializing CPU#2 [ 41.125369] Calibrating delay using timer specific routine.. 5999.49 BogoMIPS (lpj=2999749) [ 41.125382] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 41.125385] CPU: L2 cache: 1024K [ 41.125389] CPU: Physical Processor ID: 0 [ 41.125402] CPU2: Thermal monitoring enabled (TM1) [ 41.125668] Intel(R) Xeon(TM) CPU 3.00GHz stepping 01 [ 41.125679] APIC error on CPU2: 00(40) [ 41.125683] CPU 2: Syncing TSC to CPU 0. [ 41.125820] CPU 2: synchronized TSC with CPU 0 (last diff -150 cycles, maxerr 937 cycles) [ 41.125927] SMP alternatives: switching to SMP code [ 41.126073] Booting processor 3/4 APIC 0x7 [ 41.136451] Initializing CPU#3 [ 41.197290] Calibrating delay using timer specific routine.. 5999.49 BogoMIPS (lpj=2999746) [ 41.197302] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 41.197303] CPU: L2 cache: 1024K [ 41.197307] CPU: Physical Processor ID: 3 [ 41.197318] CPU3: Thermal monitoring enabled (TM1) [ 41.197548] Intel(R) Xeon(TM) CPU 3.00GHz stepping 01 [ 41.197557] APIC error on CPU3: 00(40) [ 41.197560] CPU 3: Syncing TSC to CPU 0. [ 41.197744] CPU 3: synchronized TSC with CPU 0 (last diff 15 cycles, maxerr 1252 cycles) [ 41.197755] Brought up 4 CPUs [ 41.197793] time.c: Using PIT/TSC based timekeeping. [ 41.197796] testing NMI watchdog ... OK. [ 41.208305] NET: Registered protocol family 16 [ 41.208336] ACPI: bus type pci registered [ 41.208344] PCI: Using configuration type 1 [ 41.214339] PCI: Using MMCONFIG at e0000000 [ 41.215320] ACPI: Subsystem revision 20051216 [ 41.218192] ACPI: Interpreter enabled [ 41.218195] ACPI: Using IOAPIC for interrupt routing [ 41.218769] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 41.218772] PCI: Probing PCI hardware (bus 00) [ 41.221619] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 41.221623] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 41.221657] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 41.221751] PCI: PXH quirk detected, disabling MSI for SHPC device [ 41.221805] PCI: PXH quirk detected, disabling MSI for SHPC device [ 41.222584] Boot video device is 0000:08:01.0 [ 41.222630] PCI: Transparent bridge - 0000:00:1e.0 [ 41.222674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 41.226967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 41.227184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH0._PRT] [ 41.227543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH1._PRT] [ 41.227767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEY0._PRT] [ 41.227986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ0._PRT] [ 41.228434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT] [ 41.228607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 41.229406] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) [ 41.229623] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) [ 41.229836] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) [ 41.230048] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15) [ 41.230265] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 41.230475] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. [ 41.230686] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15) [ 41.230901] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 *11 14 15) [ 41.233593] Linux Plug and Play Support v0.97 (c) Adam Belay [ 41.233603] pnp: PnP ACPI init [ 41.236668] pnp: PnP ACPI: found 13 devices [ 41.236687] PCI: Using ACPI for IRQ routing [ 41.236689] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 41.236835] PCI-DMA: Disabling IOMMU. [ 41.237288] PCI: Bridge: 0000:01:00.0 [ 41.237290] IO window: disabled. [ 41.237293] MEM window: disabled. [ 41.237295] PREFETCH window: disabled. [ 41.237299] PCI: Bridge: 0000:03:02.0 [ 41.237301] IO window: disabled. [ 41.237305] MEM window: dd200000-dd2fffff [ 41.237308] PREFETCH window: 88000000-880fffff [ 41.237312] PCI: Bridge: 0000:01:00.2 [ 41.237313] IO window: disabled. [ 41.237317] MEM window: dd200000-dd2fffff [ 41.237320] PREFETCH window: 88000000-880fffff [ 41.237323] PCI: Bridge: 0000:00:02.0 [ 41.237324] IO window: disabled. [ 41.237327] MEM window: dd100000-dd2fffff [ 41.237331] PREFETCH window: 88000000-880fffff [ 41.237334] PCI: Bridge: 0000:00:04.0 [ 41.237335] IO window: disabled. [ 41.237338] MEM window: disabled. [ 41.237340] PREFETCH window: disabled. [ 41.237343] PCI: Bridge: 0000:00:06.0 [ 41.237345] IO window: disabled. [ 41.237347] MEM window: disabled. [ 41.237350] PREFETCH window: disabled. [ 41.237353] PCI: Bridge: 0000:00:1c.0 [ 41.237356] IO window: 2000-2fff [ 41.237360] MEM window: dd300000-dd3fffff [ 41.237362] PREFETCH window: disabled. [ 41.237366] PCI: Bridge: 0000:00:1e.0 [ 41.237369] IO window: 3000-3fff [ 41.237373] MEM window: dd400000-deffffff [ 41.237377] PREFETCH window: 88100000-881fffff [ 41.237390] GSI 16 sharing vector 0xA9 and IRQ 16 [ 41.237393] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 41.237399] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 41.237409] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 41.237419] PCI: Setting latency timer of device 0000:01:00.2 to 64 [ 41.237432] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 41.237436] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 41.237444] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 41.237448] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 41.237460] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 41.237570] Simple Boot Flag at 0x39 set to 0x1 [ 41.238509] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 41.238981] audit: initializing netlink socket (disabled) [ 41.238996] audit(1152183377.112:1): initialized [ 41.239237] VFS: Disk quotas dquot_6.5.1 [ 41.239262] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 41.239327] Initializing Cryptographic API [ 41.239333] io scheduler noop registered [ 41.239345] io scheduler anticipatory registered [ 41.239356] io scheduler deadline registered [ 41.239384] io scheduler cfq registered [ 41.240693] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 41.240700] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 41.240718] Allocate Port Service[pcie00] [ 41.240761] Allocate Port Service[pcie01] [ 41.240809] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 41.240814] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 41.240831] Allocate Port Service[pcie00] [ 41.240872] Allocate Port Service[pcie01] [ 41.240916] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 41.240921] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 41.240939] Allocate Port Service[pcie00] [ 41.240973] Allocate Port Service[pcie01] [ 41.261427] Real Time Clock Driver v1.12 [ 41.261482] Linux agpgart interface v0.101 (c) Dave Jones [ 41.261639] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 41.275115] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 41.276010] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 41.276017] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 41.276196] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 41.276314] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 41.278672] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 41.278844] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 41.279503] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 41.279573] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 41.279578] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 41.279797] mice: PS/2 mouse device common for all mice [ 41.281691] NET: Registered protocol family 2 [ 41.296634] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 41.297117] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 41.300516] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 41.301160] TCP: Hash tables configured (established 262144 bind 65536) [ 41.301164] TCP reno registered [ 41.301321] TCP bic registered [ 41.301333] NET: Registered protocol family 1 [ 41.301342] NET: Registered protocol family 8 [ 41.301344] NET: Registered protocol family 20 [ 41.301499] ACPI wakeup devices: [ 41.301502] PEX0 PXH0 PXH1 PEY0 PEZ0 USB1 USB2 EUSB PCIX PCIB KBC0 MSE0 [ 41.301512] ACPI: (supports S0 S1 S4 S5) [ 41.301578] Freeing unused kernel memory: 180k freed [ 41.317652] input: AT Translated Set 2 keyboard as /class/input/input0 [ 41.356843] vga16fb: initializing [ 41.356848] vga16fb: mapped to 0xffff8100000a0000 [ 41.509803] Console: switching to colour frame buffer device 80x25 [ 41.509809] fb0: VGA16 VGA frame buffer device [ 42.527222] Capability LSM initialized [ 43.074419] SCSI subsystem initialized [ 43.075368] GSI 17 sharing vector 0xB1 and IRQ 17 [ 43.075374] ACPI: PCI Interrupt 0000:04:0e.0[A] -> GSI 74 (level, low) -> IRQ 177 [ 43.075430] scsi_proc_hostdir_add: proc_mkdir failed for <NULL> [ 43.075435] ARECA RAID ADAPTER0: 64BITS PCI BUS DMA ADDRESSING SUPPORTED [ 43.086949] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.36 2005-3-17 [ 43.097915] scsi0 : ARECA ARC1120 PCI-X 8 PORTS SATA RAID CONTROLLER (RAID6-ENGINE Inside) [ 43.097917] Driver Version 1.20.00.13 [ 43.099096] Vendor: Areca Model: ARC-1120-VOL#00 Rev: R001 [ 43.099112] Type: Direct-Access ANSI SCSI revision: 03 [ 43.099302] Vendor: Areca Model: ARC-1120-VOL#01 Rev: R001 [ 43.099317] Type: Direct-Access ANSI SCSI revision: 03 [ 43.100292] Vendor: Areca Model: RAID controller Rev: R001 [ 43.100306] Type: Processor ANSI SCSI revision: 00 [ 43.109481] Driver 'sd' needs updating - please use bus_type methods [ 43.109651] SCSI device sda: 97653760 512-byte hdwr sectors (49999 MB) [ 43.109732] SCSI device sda: drive cache: write back [ 43.109856] SCSI device sda: 97653760 512-byte hdwr sectors (49999 MB) [ 43.109932] SCSI device sda: drive cache: write back [ 43.109938] sda: sda1 sda2 sda3 sda4 [ 43.124022] sd 0:0:0:0: Attached scsi disk sda [ 43.124103] SCSI device sdb: 3808591360 512-byte hdwr sectors (1949999 MB) [ 43.124160] SCSI device sdb: drive cache: write back [ 43.124267] SCSI device sdb: 3808591360 512-byte hdwr sectors (1949999 MB) [ 43.124321] SCSI device sdb: drive cache: write back [ 43.124324] sdb: sdb1 [ 43.130056] sd 0:0:0:1: Attached scsi disk sdb [ 43.543930] ICH5: IDE controller at PCI slot 0000:00:1f.1 [ 43.543945] GSI 18 sharing vector 0xB9 and IRQ 18 [ 43.543949] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185 [ 43.543960] ICH5: chipset revision 2 [ 43.543962] ICH5: not 100% native mode: will probe irqs later [ 43.543972] ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio [ 43.543984] ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:pio, hdd:pio [ 43.543993] Probing IDE interface ide0... [ 44.063048] Probing IDE interface ide1... [ 44.988439] hdd: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive [ 45.044713] ide1 at 0x170-0x177,0x376 on irq 15 [ 45.054674] hdd: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33) [ 45.054684] Uniform CD-ROM driver Revision: 3.20 [ 45.119213] usbcore: registered new driver usbfs [ 45.120046] usbcore: registered new driver hub [ 45.121697] USB Universal Host Controller Interface driver v2.3 [ 45.121775] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 45.121789] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 45.121793] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 45.122211] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 45.122227] uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001400 [ 45.122373] hub 1-0:1.0: USB hub found [ 45.122385] hub 1-0:1.0: 2 ports detected [ 45.223202] GSI 19 sharing vector 0xC1 and IRQ 19 [ 45.223207] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193 [ 45.223219] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 45.223222] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 45.223354] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 45.223368] uhci_hcd 0000:00:1d.1: irq 193, io base 0x00001420 [ 45.223664] hub 2-0:1.0: USB hub found [ 45.223672] hub 2-0:1.0: 2 ports detected [ 45.325615] GSI 20 sharing vector 0xC9 and IRQ 20 [ 45.325620] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201 [ 45.326188] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 45.326194] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 45.326233] ehci_hcd 0000:00:1d.7: debug port 1 [ 45.326239] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 45.326484] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 [ 45.326497] ehci_hcd 0000:00:1d.7: irq 201, io mem 0xdd001400 [ 45.330380] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 45.330744] hub 3-0:1.0: USB hub found [ 45.330756] hub 3-0:1.0: 4 ports detected [ 45.449631] Probing IDE interface ide0... [ 46.008040] Attempting manual resume [ 46.015005] ReiserFS: sda2: found reiserfs format "3.6" with standard journal [ 46.132226] ReiserFS: sda2: using ordered data mode [ 46.132459] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 46.133768] ReiserFS: sda2: checking transaction log (sda2) [ 46.134376] ReiserFS: sda2: Using r5 hash to sort names [ 48.859612] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 48.859667] sd 0:0:0:1: Attached scsi generic sg1 type 0 [ 48.859722] 0:0:16:0: Attached scsi generic sg2 type 3 [ 50.901135] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 50.915976] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 51.009330] hw_random hardware driver 1.0.0 loaded [ 51.015116] input: PC Speaker as /class/input/input1 [ 51.213471] Floppy drive(s): fd0 is 1.44M [ 51.228449] FDC 0 is a post-1991 82077 [ 51.236883] Intel(R) PRO/1000 Network Driver - version 7.0.33-k2 [ 51.236889] Copyright (c) 1999-2005 Intel Corporation. [ 51.236974] GSI 21 sharing vector 0xD1 and IRQ 21 [ 51.236979] ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 24 (level, low) -> IRQ 209 [ 51.261375] parport: PnPBIOS parport detected. [ 51.261481] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 51.286726] e1000: 0000:07:01.0: e1000_probe: (PCI:66MHz:32-bit) 00:30:48:74:65:18 [ 51.428870] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 51.428906] GSI 22 sharing vector 0xD9 and IRQ 22 [ 51.428912] ACPI: PCI Interrupt 0000:07:02.0[A] -> GSI 25 (level, low) -> IRQ 217 [ 51.470120] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 [ 51.486922] ts: Compaq touchscreen protocol output [ 51.689310] e1000: 0000:07:02.0: e1000_probe: (PCI:66MHz:32-bit) 00:30:48:74:65:19 [ 51.837395] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 52.009797] lp0: using parport0 (interrupt-driven). [ 52.102647] Adding 3903784k swap on /dev/sda4. Priority:-1 extents:1 across:3903784k [ 52.605537] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 52.605541] md: bitmap version 4.39 [ 54.512809] e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex [ 54.778685] dd[3872] general protection rip:2aaaaaaaca60 rsp:7fffffd8ebf0 error:0 [ 55.052536] pcc_acpi: loading... [ 55.065184] ACPI: Power Button (FF) [PWRF] [ 55.065219] ACPI: Power Button (CM) [PWRB] [ 55.116522] ibm_acpi: ec object not found [ 55.494112] dd[4276] general protection rip:2aaaaaaaca60 rsp:7ffffff0c6e0 error:0 [ 55.526152] pam_getenv[4286]: segfault at 00002aaaab3d3958 rip 00002aaaab3d3958 rsp 00007fffffb3bdf8 error 15 [ 55.528975] pam_getenv[4287]: segfault at 00002aaaab3d3958 rip 00002aaaab3d3958 rsp 00007fffffcefa58 error 15 [ 56.275810] dpkg-statoverri[4617]: segfault at 00002aaaab3d3958 rip 00002aaaab3d3958 rsp 00007ffffffab5d8 error 15 [ 56.350670] ppdev: user-space parallel port driver [ 58.463968] NET: Registered protocol family 10 [ 58.464207] lo: Disabled Privacy Extensions [ 58.464532] IPv6 over IPv4 tunneling driver [ 69.338660] eth0: no IPv6 routers present [ 89.472637] apt-get[5044]: segfault at 0000000000000008 rip 00002aaaaaab73a8 rsp 00007fffffeec2c0 error 4 -- 6.06 64bit kernel totally broken after install, gcc3.3 fixes https://launchpad.net/bugs/51157 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
