Dear Graeme, Thank you! As of now I will try it for coreboot target on x86_64 machine. I followed the steps given in patch file for x86 machine and modified and getting the below error. manoharb@smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/latest/u-boot$ make coreboot_config make: *** No rule to make target `coreboot_config'. Stop. make: *** [coreboot_config] Error 1
Please help me to build u-boot for coreboot. Happy Weekend! Thank you! Best Regards, Manohar 8790215215 -----Original Message----- From: "Graeme Russ" <graeme.r...@gmail.com> Sent: Friday, November 23, 2012 4:23pm To: manohar.bet...@smartplayin.com Cc: "Marek Vasut" <ma...@denx.de>, u-boot@lists.denx.de, "Simon Glass" <s...@chromium.org> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen Hi Manohar, On 11/23/2012 09:10 PM, manohar.bet...@smartplayin.com wrote: > > Dear Graeme, > > Thank you! > > I downloaded the u-boot-x86 on Ubuntu 11.10 loaded(Linux smart-OptiPlex-390 > 3.0.0-26-generic x86_64 GNU/Linux) intel i5 M1H61R-MB montherboard from the > given below link. > > http://git.denx.de/?p=u-boot/u-boot-x86.git;a=summary Depending on when you downloaded it, you may not have the latest mainline which is at: http://git.denx.de/?p=u-boot.git;a=summary Nevertheless, you will have the latest x86 patches > > and yes I am planning to run u-boot on x86_64 machine and my target is also > x86_64 machine are the same . > cd u-boot-x86 Hmm, I don't think U-Boot is what your after. There are a few problems you will be faced with: - There is no ACPI support (no power management) - No System Management Mode (SMM) support - No chipset support (No RAM initialisation) - No Cache-As-RAM init code Unless you have at least these covered, you will brick your board if you try to flash U-Boot. You might instead take a look at coreboot > opened the boards.config file and appended my board details in the config > file . > > MIH61R-MB x86 x86 MIH61R-MB > GenuineIntel - > # Target ARCH CPU Board name > Vendor SoC Options > > > and then run the below commands and i didnot modify any code other than that > above line. > ..................................................................................................................................... > > manoharb@smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ vim > boards.cfg > manoharb@smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ make > distclean > /bin/bash: i386-linux-gcc: command not found > /bin/bash: i386-linux-gcc: command not found [snip] Ah, I now see that the patch I thought had been applied has not :( You will need this patch: http://patchwork.ozlabs.org/patch/155727/ Regards, Graeme > ............................................................................................................................................................................................................................................................................................................................................... > > Please help me what are the files i need to modify and provide me the > documentation. > > Thank you! > Best Regards, > Manohar > 8790215215 > > > -----Original Message----- > From: "Graeme Russ" <graeme.r...@gmail.com> > Sent: Friday, November 23, 2012 12:12pm > To: manohar.bet...@smartplayin.com > Cc: "Marek Vasut" <ma...@denx.de>, u-boot@lists.denx.de > Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen > > > > Hi Manohar, > > On 11/23/2012 04:46 PM, manohar.bet...@smartplayin.com wrote: >> >> Dear Marek, >> >> Thank you for the reply. >> >> Can you please send me the steps/procedure to build/support u-boot on x86_64 >> bit (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz. > > I build the x86 U-Boot target on an x86_64 i7 Linux (Fedora) system using > the standard GNU gcc package. There was an issue with the Makefile and > there was a need to manually create some toolchain symlinks, but the was > rectified some time ago. Are you using the latest mainline U-Boot from > git.denx.de? If so, what errors are you getting - please provide a copy of > your build output. > >> We need help from you is there any documentation to enable x86_64 bit pc or >> links to post my query. >> >> What are the config/code i need to change to make my pc as host & target are >> the same. > > Are you planning on running U-Boot on an x86_64 machine? If so, you will > need to create code to support that - Current U-Boot only supports 32-bit > x86 targets. The sandbox target (designed for testing on a Linux host, not > for downloading onto a board) should run on an x86_64 host. > >> >> Please help us to build the u-boot on x86_64. > > Please provide more detail - what have you tried? What was the result? The > build scripts should work as is on a properly configured x86_64 build machine > > Regards, > > Graeme > > P.S. Please stop top posting - thanks > >> >> Thank you! >> Best Regards, >> Manohar >> 8790215215 >> >> >> >> -----Original Message----- >> From: "Marek Vasut" <ma...@denx.de> >> Sent: Friday, November 23, 2012 6:08am >> To: u-boot@lists.denx.de >> Cc: manohar.bet...@smartplayin.com, "Graeme Russ" <graeme.r...@gmail.com> >> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen >> >> >> >> Dear manohar.bet...@smartplayin.com, >> >>> Hi, >>> >>> I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @ >>> 3.10GHz) using u-boot to work for TIZEN . >>> >>> As I am unable to configure/build my pc using u-boot-x86 . >>> >>> I request you please help me how to configure it/build the u-boot-x86 on my >>> pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as >>> host and target are the same. >>> >>> Please resolve the issue/is my PC support for the u-boot. >> >> You need to compile it on a 32bit machine ... or install 32bit cross >> compiler >> ... u-boot doesn't support x86/64. Patches are welcome though. >> >> Best regards, >> Marek Vasut >> > >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
