Dear Graeme, Thank you! I downloaded the u-boot-x86 on Ubuntu 11.10 loaded(Linux smart-OptiPlex-390 3.0.0-26-generic x86_64 GNU/Linux) intel i5 M1H61R-MB montherboard from the given below link. http://git.denx.de/?p=u-boot/u-boot-x86.git;a=summary and yes I am planning to run u-boot on x86_64 machine and my target is also x86_64 machine are the same . cd u-boot-x86 opened the boards.config file and appended my board details in the config file . MIH61R-MB x86 x86 MIH61R-MB GenuineIntel - # Target ARCH CPU Board name Vendor SoC Options and then run the below commands and i didnot modify any code other than that above line. ..................................................................................................................................... manoharb@smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ vim boards.cfg manoharb@smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ make distclean /bin/bash: i386-linux-gcc: command not found /bin/bash: i386-linux-gcc: command not found basename: missing operand Try `basename --help' for more information. /bin/bash: i386-linux-gcc: command not found basename: missing operand Try `basename --help' for more information. /bin/bash: i386-linux-gcc: command not found basename: missing operand Try `basename --help' for more information. /bin/bash: i386-linux-gcc: command not found /bin/bash: i386-linux-gcc: command not found basename: missing operand Try `basename --help' for more information. /bin/bash: i386-linux-gcc: command not found basename: missing operand Try `basename --help' for more information. /bin/bash: i386-linux-gcc: command not found basename: missing operand Try `basename --help' for more information. /bin/bash: i386-linux-gcc: command not found basename: missing operand Try `basename --help' for more information. /bin/bash: i386-linux-gcc: command not found basename: missing operand Try `basename --help' for more information. /bin/bash: i386-linux-gcc: command not found basename: missing operand Try `basename --help' for more information. /bin/bash: i386-linux-gcc: command not found basename: missing operand Try `basename --help' for more information. /bin/bash: i386-linux-gcc: command not found basename: missing operand Try `basename --help' for more information. /bin/bash: i386-linux-gcc: command not found basename: missing operand Try `basename --help' for more information. manoharb@smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ make MIH61R-MB_config Configuring for MIH61R-MB board... ln: creating symbolic link `asm/arch': No such file or directory make: *** [MIH61R-MB_config] Error 1 manoharb@smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ ............................................................................................................................................................................................................................................................................................................................................... Please help me what are the files i need to modify and provide me the documentation. Thank you! Best Regards, Manohar 8790215215 -----Original Message----- From: "Graeme Russ" <graeme.r...@gmail.com> Sent: Friday, November 23, 2012 12:12pm To: manohar.bet...@smartplayin.com Cc: "Marek Vasut" <ma...@denx.de>, u-boot@lists.denx.de Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
Hi Manohar, On 11/23/2012 04:46 PM, manohar.bet...@smartplayin.com wrote: > > Dear Marek, > > Thank you for the reply. > > Can you please send me the steps/procedure to build/support u-boot on x86_64 > bit (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz. I build the x86 U-Boot target on an x86_64 i7 Linux (Fedora) system using the standard GNU gcc package. There was an issue with the Makefile and there was a need to manually create some toolchain symlinks, but the was rectified some time ago. Are you using the latest mainline U-Boot from git.denx.de? If so, what errors are you getting - please provide a copy of your build output. > We need help from you is there any documentation to enable x86_64 bit pc or > links to post my query. > > What are the config/code i need to change to make my pc as host & target are > the same. Are you planning on running U-Boot on an x86_64 machine? If so, you will need to create code to support that - Current U-Boot only supports 32-bit x86 targets. The sandbox target (designed for testing on a Linux host, not for downloading onto a board) should run on an x86_64 host. > > Please help us to build the u-boot on x86_64. Please provide more detail - what have you tried? What was the result? The build scripts should work as is on a properly configured x86_64 build machine Regards, Graeme P.S. Please stop top posting - thanks > > Thank you! > Best Regards, > Manohar > 8790215215 > > > > -----Original Message----- > From: "Marek Vasut" <ma...@denx.de> > Sent: Friday, November 23, 2012 6:08am > To: u-boot@lists.denx.de > Cc: manohar.bet...@smartplayin.com, "Graeme Russ" <graeme.r...@gmail.com> > Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen > > > > Dear manohar.bet...@smartplayin.com, > >> Hi, >> >> I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @ >> 3.10GHz) using u-boot to work for TIZEN . >> >> As I am unable to configure/build my pc using u-boot-x86 . >> >> I request you please help me how to configure it/build the u-boot-x86 on my >> pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as >> host and target are the same. >> >> Please resolve the issue/is my PC support for the u-boot. > > You need to compile it on a 32bit machine ... or install 32bit cross compiler > ... u-boot doesn't support x86/64. Patches are welcome though. > > Best regards, > Marek Vasut >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
