Add static struct eth_ops and set ops function pointers statically. Remove setting eth_ops members dynamically.
This is a step toward converting the driver for DM. Signed-off-by: Tomas Hlavacek <tmshl...@gmail.com> --- drivers/net/calxedaxgmac.c | 14 ++++++++++---- 1 files changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/net/calxedaxgmac.c b/drivers/net/calxedaxgmac.c index 2346feb..3550160 100644 --- a/drivers/net/calxedaxgmac.c +++ b/drivers/net/calxedaxgmac.c @@ -508,6 +508,15 @@ static void xgmac_halt(struct eth_device *dev) priv->rx_currdesc = 0; } +static struct eth_ops xgmac_ops = { + .init = xgmac_init, + .send = xgmac_tx, + .recv = xgmac_rx, + .halt = xgmac_halt +}; + + + int calxedaxgmac_initialize(u32 id, ulong base_addr) { struct eth_device *dev; @@ -543,10 +552,7 @@ int calxedaxgmac_initialize(u32 id, ulong base_addr) macaddr[0] = readl(®s->macaddr[0].lo); memcpy(dev->enetaddr, macaddr, 6); - dev->eo->init = xgmac_init; - dev->eo->send = xgmac_tx; - dev->eo->recv = xgmac_rx; - dev->eo->halt = xgmac_halt; + dev->eo = &xgmac_ops; eth_register(dev); -- 1.7.2.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot