Add static struct eth_ops and set ops function pointers statically.
Remove setting eth_ops members dynamically.
This is a step toward converting the driver for DM.
Signed-off-by: Tomas Hlavacek <tmshl...@gmail.com>
---
drivers/net/dm9000x.c | 12 ++++++++----
1 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index bd96948..f6b226c 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -623,6 +623,13 @@ dm9000_phy_write(int reg, u16 value)
DM9000_DBG("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value);
}
+static struct eth_ops dm9000_ops = {
+ .init = dm9000_init,
+ .send = dm9000_send,
+ .recv = dm9000_rx,
+ .halt = dm9000_halt
+};
+
int dm9000_initialize(bd_t *bis)
{
struct eth_device *dev = &(dm9000_info.netdev);
@@ -630,10 +637,7 @@ int dm9000_initialize(bd_t *bis)
/* Load MAC address from EEPROM */
dm9000_get_enetaddr(dev);
- dev->eo->init = dm9000_init;
- dev->eo->halt = dm9000_halt;
- dev->eo->send = dm9000_send;
- dev->eo->recv = dm9000_rx;
+ dev->eo = &dm9000_ops;
sprintf(dev->name, "dm9000");
eth_register(dev);
--
1.7.2.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
