On 11/08/2012 09:31:10 AM, Peter Niklas wrote:
Hello,
We are using a Zynq SoC on a custom Board. We are trying to use a
NAND-Flash (MT29F8G08ABABAWP-IT) to store the Xilinx First Stage Boot
Loader, U-Boot, Kernel ....
We are having trouble to use the NAND-Flash in U-Boot.
Currently we are using U-Boot 2012.04.01-00304-g7639205-dirty.
and I get the Messag:
NAND: No NAND device found!!!
nand_scan_ident for NAND failed
I enabled CMD_NAND in the specific config file:
#define CONFIG_NAND_ZYNQ
It's not just an unrecognized (and dirty) SHA1 as Wolfgang pointed out
(which is not necessarily that surprising for a custom board, but it's
still code we can't see) -- there's not even any CONFIG_NAND_ZYNQ in
mainline U-Boot.
-Scott
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
