Add support for the OTG port on the mx35pdk Personality board.
Signed-off-by: Benoît Thébaudeau <benoit.thebaud...@advansee.com>
Cc: Stefano Babic <sba...@denx.de>
Cc: Marek Vasut <ma...@denx.de>
---
Note: I have tested this on a similar board, but not on the mx35pdk itself. So
please, someone test on mx35pdk. Stefano?
.../board/freescale/mx35pdk/lowlevel_init.S | 4 ++++
.../board/freescale/mx35pdk/mx35pdk.c | 19 +++++++++++++++++++
.../include/configs/mx35pdk.h | 14 ++++++++++++++
3 files changed, 37 insertions(+)
diff --git u-boot-usb-76454b2.orig/board/freescale/mx35pdk/lowlevel_init.S
u-boot-usb-76454b2/board/freescale/mx35pdk/lowlevel_init.S
index 698c4cf..6f4d4e0 100644
--- u-boot-usb-76454b2.orig/board/freescale/mx35pdk/lowlevel_init.S
+++ u-boot-usb-76454b2/board/freescale/mx35pdk/lowlevel_init.S
@@ -178,6 +178,10 @@
orr r1, r1, #0x00000C00
orr r1, r1, #0x00000003
str r1, [r0, #CLKCTL_CGR1]
+
+ ldr r1, [r0, #CLKCTL_CGR2]
+ orr r1, r1, #0x00C00000
+ str r1, [r0, #CLKCTL_CGR2]
.endm
.macro setup_sdram
diff --git u-boot-usb-76454b2.orig/board/freescale/mx35pdk/mx35pdk.c
u-boot-usb-76454b2/board/freescale/mx35pdk/mx35pdk.c
index 7cb6b30..e9ef4d1 100644
--- u-boot-usb-76454b2.orig/board/freescale/mx35pdk/mx35pdk.c
+++ u-boot-usb-76454b2/board/freescale/mx35pdk/mx35pdk.c
@@ -97,6 +97,24 @@ static void setup_iomux_spi(void)
mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION);
}
+static void setup_iomux_usbotg(void)
+{
+ int in_pad, out_pad;
+
+ /* Set up pins for USBOTG. */
+ mxc_request_iomux(MX35_PIN_USBOTG_PWR, MUX_CONFIG_SION |
MUX_CONFIG_FUNC);
+ mxc_request_iomux(MX35_PIN_USBOTG_OC, MUX_CONFIG_SION |
MUX_CONFIG_FUNC);
+
+ in_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE |
+ PAD_CTL_PUE_PUD | PAD_CTL_100K_PD | PAD_CTL_ODE_CMOS |
+ PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW;
+ out_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_CMOS | PAD_CTL_PKE_NONE |
+ PAD_CTL_ODE_CMOS | PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW;
+
+ mxc_iomux_set_pad(MX35_PIN_USBOTG_PWR, out_pad);
+ mxc_iomux_set_pad(MX35_PIN_USBOTG_OC, in_pad);
+}
+
static void setup_iomux_fec(void)
{
int pad;
@@ -188,6 +206,7 @@ int board_early_init_f(void)
__raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
setup_iomux_i2c();
+ setup_iomux_usbotg();
setup_iomux_fec();
setup_iomux_spi();
diff --git u-boot-usb-76454b2.orig/include/configs/mx35pdk.h
u-boot-usb-76454b2/include/configs/mx35pdk.h
index 826c912..69b7d23 100644
--- u-boot-usb-76454b2.orig/include/configs/mx35pdk.h
+++ u-boot-usb-76454b2/include/configs/mx35pdk.h
@@ -110,6 +110,8 @@
#define CONFIG_NET_RETRY_COUNT 100
#define CONFIG_CMD_DATE
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
#define CONFIG_CMD_MMC
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
@@ -242,6 +244,18 @@
#define CONFIG_MXC_NAND_HWECC
#define CONFIG_SYS_NAND_LARGEPAGE
+/* EHCI driver */
+#define CONFIG_USB_EHCI
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_EHCI_MXC
+#define CONFIG_MXC_USB_PORT 0
+#define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERFACE_DIFF_UNI | \
+ MXC_EHCI_POWER_PINS_ENABLED | \
+ MXC_EHCI_OC_PIN_ACTIVE_LOW)
+#define CONFIG_MXC_USB_PORTSC (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
+
/* mmc driver */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
