The EHCI definitions in i.MX31's imx-regs.h are MXC-generic, so move them to
ehci-fsl.h so that all MXC SoCs can use them.
Signed-off-by: Benoît Thébaudeau <benoit.thebaud...@advansee.com>
Cc: Marek Vasut <ma...@denx.de>
Cc: Stefano Babic <sba...@denx.de>
---
.../arch/arm/include/asm/arch-mx31/imx-regs.h | 26 --------------------
.../include/usb/ehci-fsl.h | 22 +++++++++++++++++
2 files changed, 22 insertions(+), 26 deletions(-)
diff --git u-boot-usb-76454b2.orig/arch/arm/include/asm/arch-mx31/imx-regs.h
u-boot-usb-76454b2/arch/arm/include/asm/arch-mx31/imx-regs.h
index 8fd3d08..01a849d 100644
--- u-boot-usb-76454b2.orig/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ u-boot-usb-76454b2/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -896,32 +896,6 @@ struct esdc_regs {
#define MX31_AIPS1_BASE_ADDR 0x43f00000
#define IMX_USB_BASE (MX31_AIPS1_BASE_ADDR + 0x88000)
-/* USB portsc */
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
-#define MXC_EHCI_FORCE_FS (1 << 24)
-#define MXC_EHCI_UTMI_8BIT (0 << 28)
-#define MXC_EHCI_UTMI_16BIT (1 << 28)
-#define MXC_EHCI_SERIAL (1 << 29)
-#define MXC_EHCI_MODE_UTMI (0 << 30)
-#define MXC_EHCI_MODE_PHILIPS (1 << 30)
-#define MXC_EHCI_MODE_ULPI (2 << 30)
-#define MXC_EHCI_MODE_SERIAL (3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
-#define MXC_EHCI_INTERFACE_MASK (0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
-#define MXC_EHCI_TTL_ENABLED (1 << 6)
-
-#define MXC_EHCI_INTERNAL_PHY (1 << 7)
-#define MXC_EHCI_IPPUE_DOWN (1 << 8)
-#define MXC_EHCI_IPPUE_UP (1 << 9)
-
/*
* CSPI register definitions
*/
diff --git u-boot-usb-76454b2.orig/include/usb/ehci-fsl.h
u-boot-usb-76454b2/include/usb/ehci-fsl.h
index 2869302..4dee5b0 100644
--- u-boot-usb-76454b2.orig/include/usb/ehci-fsl.h
+++ u-boot-usb-76454b2/include/usb/ehci-fsl.h
@@ -246,9 +246,31 @@ struct usb_ehci {
/*
* For MXC SOCs
*/
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
+#define MXC_EHCI_FORCE_FS (1 << 24)
+#define MXC_EHCI_UTMI_8BIT (0 << 28)
+#define MXC_EHCI_UTMI_16BIT (1 << 28)
+#define MXC_EHCI_SERIAL (1 << 29)
+#define MXC_EHCI_MODE_UTMI (0 << 30)
+#define MXC_EHCI_MODE_PHILIPS (1 << 30)
+#define MXC_EHCI_MODE_ULPI (2 << 30)
+#define MXC_EHCI_MODE_SERIAL (3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
+#define MXC_EHCI_INTERFACE_MASK (0xf)
+
#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
#define MXC_EHCI_TTL_ENABLED (1 << 6)
+
#define MXC_EHCI_INTERNAL_PHY (1 << 7)
+#define MXC_EHCI_IPPUE_DOWN (1 << 8)
+#define MXC_EHCI_IPPUE_UP (1 << 9)
/* Board-specific initialization */
int board_ehci_hcd_init(int port);
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
