This fixes the following boothang in SPL:
Unknown board, cannot configure pinmux.### ERROR ### Please RESET the
board ###
Future commits will add pinmuxes for more on-board peripherals.
Signed-off-by: Koen Kooi <k...@dominion.thruhere.net>
---
board/ti/am335x/mux.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 80becd5..73d2173 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -448,6 +448,12 @@ void enable_board_pin_mux(struct am335x_baseboard_id
*header)
configure_module_pin_mux(gpio0_7_pin_mux);
configure_module_pin_mux(rgmii1_pin_mux);
configure_module_pin_mux(mmc0_pin_mux_sk_evm);
+ } else if (!strncmp(header->name, "A335BNLT", HDR_NAME_LEN)) {
+ /* Beaglebone LT pinmux */
+ configure_module_pin_mux(i2c1_pin_mux);
+ configure_module_pin_mux(mii1_pin_mux);
+ configure_module_pin_mux(mmc0_pin_mux);
+ configure_module_pin_mux(mmc1_pin_mux);
} else {
puts("Unknown board, cannot configure pinmux.");
hang();
--
1.7.7.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
