Hi
I am working on a custom board (VPX Based P2020 board) and trying to port
u-boot-2011.09 (supports P2020 RDB) in it . Our board is similar to P2020RDB
board and the technical specification is shown below ,
->Processor
Freescale QorIQ P2020 processor
Dual PowerPC e500v2 cores at up to 1.2 GHz
512 kB of shared L2 cache
->Memory
1 GB of DDR3-600 SDRAM
128 MB of NOR flash (16-bit)
Through Codewarroier Emulator Tool, We checked the DDR,FLASH,Uart console
and its working fine without any issue.
when we ported u-boot (u-boot-2011.09) at boot rom location 0xFFF80000, it
fails at invalidate_tlbs in cpu_init_early_f and cannot proceed to get
serial console .we probed the flash CS while poweron boot , processor is
keeping bunch of CS( confirms processor able to access flash)
Why its getting held up while invalidating tlb's
Can you help us to solve the issue
--
View this message in context:
http://old.nabble.com/P2020rdb-%3A--process-hangs-while-invalidate_tlb%27s-tp34572303p34572303.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
