> -----Original Message----- > From: Tabi Timur-B04825 > Sent: Saturday, October 13, 2012 3:25 AM > To: Xie Shaohui-B21989 > Cc: u-boot@lists.denx.de > Subject: Re: [U-Boot] [PATCH] powerpc/fm: fix TBI PHY address settings > > On Fri, Oct 12, 2012 at 1:25 AM, Shaohui Xie <shaohui....@freescale.com> > wrote: > > From: shaohui xie <shaohui....@freescale.com> > > > > TBI PHY address (TBIPA) register is set in general frame manager phy > > init funciton dtsec_init_phy() in drivers/net/fm/eth.c, and it is > > supposed to set TBIPA on FM1@DTSEC1 in case of FM1@DTSEC1 isn't used > > directly, which provides MDIO for other ports. So following code is > > wrong in case of FM2, which has a different mac base. > > Is this still true with Fman v3? [S.H] No. Fman V3 does not need to set TBIPA on FM1@DTSEC1.
> > Does this patch fix any known bugs? [S.H] Yes, it fixed a bug internally (ENGR224292: p4080ds FM2@DTSEC4 can't ping), and I sent it upstream as Kumar suggested. Best Regards, Shaohui Xie _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot