I am working on a embedded board that uses a BF537 (Blackfin) and
ISP1362 USB controller. I want to access a USB flash drive from
U-Boot. But I haven't been able to find the drivers for the ISP1362.
I have found two other U-Boot target platforms that at least reference
the ISP1362:
In include/configs/NSCU.h, I found this:
#define CONFIG_ISP1362_USB /* ISP1362 USB OTG controller
*/
#ifdef CONFIG_ISP1362_USB
#define CONFIG_SYS_ISP1362_BASE 0xD0000000 /* ISP1362 mapped at
0xD0000000 */
#define CONFIG_SYS_ISP1362_OR_AM 0xFFFF8000 /* 32 kB address mask
*/
#define CONFIG_SYS_OR5_ISP1362 (CONFIG_SYS_ISP1362_OR_AM |
OR_CSNT_SAM | \
OR_ACS_DIV2 | OR_BI | OR_SCY_5_CLK)
#define CONFIG_SYS_BR5_ISP1362 ((CONFIG_SYS_ISP1362_BASE &
BR_BA_MSK) | \
BR_PS_16 | BR_MS_GPCM | BR_V )
#endif /* CONFIG_ISP1362_USB */
And in board/tqc/tqm8xx/tqm8xx.c:
#ifdef CONFIG_ISP1362_USB
memctl->memc_or5 = CONFIG_SYS_OR5_ISP1362;
memctl->memc_br5 = CONFIG_SYS_BR5_ISP1362;
#endif /*
CONFIG_ISP1362_USB */
The first of those certainly appears to be setting up a driver for the
ISP1362, but I haven't been able to find that driver. Any pointers
would be greatly appreciated.
Steve
--
Steve Strobel
Link Communications, Inc.
1035 Cerise Rd
Billings, MT 59101-7378
(406) 245-5002 ext 102
(406) 245-4889 (fax)
WWW: http://www.link-comm.com
MailTo:steve.stro...@link-comm.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
