> -----Original Message----- > From: Michael Walle [mailto:mich...@walle.cc] > Sent: 03 October 2012 21:15 > To: u-boot@lists.denx.de > Cc: Michael Walle; Prafulla Wadaskar > Subject: [PATCH] lsxl: set ncip to broadcast address > > Instead of using the serverip we get from the DHCP server, use the > broadcast address. That way it isn't necessary to use a special DHCP > configuration to set the netconsole peer. > > Signed-off-by: Michael Walle <mich...@walle.cc> > Cc: Prafulla Wadaskar <prafu...@marvell.com> > --- > > Hi Prafulla, > > although it isn't a bugfix, it would be nice, if this patch made it > into > the 2012.10 release. > > include/configs/lsxl.h | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h > index 0db559c..663c5e2 100644 > --- a/include/configs/lsxl.h > +++ b/include/configs/lsxl.h > @@ -146,7 +146,7 @@ > "config_nc_dhcp=setenv autoload_old ${autoload}; " \ > "setenv autoload no " \ > "&& bootp " \ > - "&& setenv ncip ${serverip} " \ > + "&& setenv ncip 255.255.255.255 " \
Michael Hard coding an ip-address is not recommended in u-boot environment. I would need ack from Joe and Wolfgang to pull this patch. Regards... Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
