Dear Piotr Wilczek, On 20 September 2012 19:19, Piotr Wilczek <p.wilc...@samsung.com> wrote: > This patch fixes SDRAM configuration and size visibility fot Trats board. > > Code for MMC initialisation is moved from board file to pinmux. > MMC0 and MMC2 are supported. Both tested on Trats and Universal C210 boards. > MMC initialisation for boards Trats and Universal C210 is done using pinmux. > > Low level initialisation in u-boot is eliminated as it is done by > another bootloader. > > Changes for v2: > - mmc initialisation using pinmux > - mmc initialisation code moved to pinmux instead of creating a new common > code file > Changes for v3: > - init SD card also when eMMC init failed > Changes for v4: > - eliminated warning for uninitialized bank, bank_ext > > Piotr Wilczek (6): > arm:exynos4:trats: Correct SDRAM configuration for trats > arm:exynos4:trats: Fix SDRAM size > arm:exynos4:pinmux: Modify the gpio function for mmc > arm:exynos4:trats: Use pinmux for mmc configuration > arm:exynos4:universal: Use pinmux for mmc configuration > arm:exynos4:universal: Eliminated low level init > > arch/arm/cpu/armv7/exynos/pinmux.c | 58 ++++ > arch/arm/include/asm/arch-exynos/periph.h | 1 + > board/samsung/trats/trats.c | 76 ++---- > board/samsung/universal_c210/Makefile | 1 - > board/samsung/universal_c210/lowlevel_init.S | 395 > -------------------------- > board/samsung/universal_c210/universal.c | 82 ++---- > include/configs/s5pc210_universal.h | 2 + > include/configs/trats.h | 17 +- > 8 files changed, 114 insertions(+), 518 deletions(-) > delete mode 100644 board/samsung/universal_c210/lowlevel_init.S >
applied to u-boot-samsung. Thanks. Minkyu Kang. -- from. prom. www.promsoft.net _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
