Add calls to the LCD driver from Nvidia board code.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v3:
- Add separate call to pwm_init() in board_init()
Changes in v4:
- Change order of LCD init so that PWM comes first
board/nvidia/common/board.c | 21 ++++++++++++++++++++-
1 files changed, 20 insertions(+), 1 deletions(-)
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 7a7d55c..17aafb6 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -26,6 +26,7 @@
#include <linux/compiler.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
+#include <asm/arch/display.h>
#include <asm/arch/emc.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/pmu.h>
@@ -110,6 +111,9 @@ int board_init(void)
if (pwm_init(gd->fdt_blob))
debug("%s: Failed to init pwm\n", __func__);
#endif
+#ifdef CONFIG_LCD
+ tegra_lcd_check_next_stage(gd->fdt_blob, 0);
+#endif
/* boot param addr */
gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
@@ -135,6 +139,9 @@ int board_init(void)
pin_mux_usb();
board_usb_init(gd->fdt_blob);
#endif
+#ifdef CONFIG_LCD
+ tegra_lcd_check_next_stage(gd->fdt_blob, 0);
+#endif
#ifdef CONFIG_TEGRA_LP0
/* save Sdram params to PMC 2, 4, and 24 for WB0 */
@@ -165,6 +172,18 @@ int board_early_init_f(void)
#else
gpio_config_uart();
#endif
- return 0;
+#ifdef CONFIG_LCD
+ tegra_lcd_early_init(gd->fdt_blob);
+#endif
+return 0;
}
#endif /* EARLY_INIT */
+
+int board_late_init(void)
+{
+#ifdef CONFIG_LCD
+ /* Make sure we finish initing the LCD */
+ tegra_lcd_check_next_stage(gd->fdt_blob, 1);
+#endif
+ return 0;
+}
--
1.7.7.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
