This patch modifies the S3C i2c driver to support both EXYNOS4 and EXYNOS5
Signed-off-by: Piotr Wilczek <p.wilc...@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
CC: Minkyu Kang <mk7.k...@samsung.com>
---
drivers/i2c/s3c24x0_i2c.c | 19 ++++++++++++-------
1 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index 9bc4c7f..90d297a 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -27,7 +27,7 @@
*/
#include <common.h>
-#ifdef CONFIG_EXYNOS5
+#if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
#include <asm/arch/clk.h>
#include <asm/arch/cpu.h>
#else
@@ -62,7 +62,7 @@
static unsigned int g_current_bus; /* Stores Current I2C Bus */
-#ifndef CONFIG_EXYNOS5
+#if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
static int GetI2CSDA(void)
{
struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
@@ -121,7 +121,12 @@ static void ReadWriteByte(struct s3c24x0_i2c *i2c)
static struct s3c24x0_i2c *get_base_i2c(void)
{
-#ifdef CONFIG_EXYNOS5
+#ifdef CONFIG_EXYNOS4
+ struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)(samsung_get_base_i2c()
+ + (EXYNOS4_I2C_SPACING
+ * g_current_bus));
+ return i2c;
+#elif defined CONFIG_EXYNOS5
struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)(samsung_get_base_i2c()
+ (EXYNOS5_I2C_SPACING
* g_current_bus));
@@ -134,7 +139,7 @@ static struct s3c24x0_i2c *get_base_i2c(void)
static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd)
{
ulong freq, pres = 16, div;
-#ifdef CONFIG_EXYNOS5
+#if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
freq = get_i2c_clk();
#else
freq = get_PCLK();
@@ -188,7 +193,7 @@ unsigned int i2c_get_bus_num(void)
void i2c_init(int speed, int slaveadd)
{
struct s3c24x0_i2c *i2c;
-#ifndef CONFIG_EXYNOS5
+#if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
#endif
int i;
@@ -204,7 +209,7 @@ void i2c_init(int speed, int slaveadd)
i--;
}
-#ifndef CONFIG_EXYNOS5
+#if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
if ((readl(&i2c->iicstat) & I2CSTAT_BSY) || GetI2CSDA() == 0) {
#ifdef CONFIG_S3C2410
ulong old_gpecon = readl(&gpio->gpecon);
@@ -248,7 +253,7 @@ void i2c_init(int speed, int slaveadd)
writel(old_gpecon, &gpio->pgcon);
#endif
}
-#endif /* #ifndef CONFIG_EXYNOS5 */
+#endif /* #if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) */
i2c_ch_init(i2c, speed, slaveadd);
}
--
1.7.5.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
