From: Fabio Estevam <fabio.este...@freescale.com>
lowlevel_init.S is not used on mx6, so remove the file and the associated calls.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
Changes since v1:
- Also remove SOBJS
arch/arm/cpu/armv7/mx6/Makefile | 5 ++---
arch/arm/cpu/armv7/mx6/lowlevel_init.S | 25 -------------------------
arch/arm/cpu/armv7/start.S | 24 ------------------------
3 files changed, 2 insertions(+), 52 deletions(-)
delete mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile
index cbce411..10f512f 100644
--- a/arch/arm/cpu/armv7/mx6/Makefile
+++ b/arch/arm/cpu/armv7/mx6/Makefile
@@ -28,10 +28,9 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
COBJS = soc.o clock.o
-SOBJS = lowlevel_init.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj), $(COBJS))
all: $(obj).depend $(LIB)
diff --git a/arch/arm/cpu/armv7/mx6/lowlevel_init.S
b/arch/arm/cpu/armv7/mx6/lowlevel_init.S
deleted file mode 100644
index acadef2..0000000
--- a/arch/arm/cpu/armv7/mx6/lowlevel_init.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-.section ".text.init", "x"
-
-#include <linux/linkage.h>
-
-ENTRY(lowlevel_init)
- mov pc, lr
-ENDPROC(lowlevel_init)
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 32658eb..4c7c385 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -152,7 +152,6 @@ reset:
/* the mask ROM code should have PLL and others stable */
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
bl cpu_init_cp15
- bl cpu_init_crit
#endif
/* Set stackpointer in internal RAM to call board_init_f */
@@ -353,29 +352,6 @@ ENTRY(cpu_init_cp15)
mov pc, lr @ back to my caller
ENDPROC(cpu_init_cp15)
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-/*************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************/
-ENTRY(cpu_init_crit)
- /*
- * Jump to board specific initialization...
- * The Mask ROM will have already initialized
- * basic memory. Go here to bump up clock rate and handle
- * wake up conditions.
- */
- mov ip, lr @ persevere link reg across call
- bl lowlevel_init @ go setup pll,mux,memory
- mov lr, ip @ restore link
- mov pc, lr @ back to my caller
-ENDPROC(cpu_init_crit)
-#endif
-
#ifndef CONFIG_SPL_BUILD
/*
*************************************************************************
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
