Repeating data values can be stored more efficiently. Signed-off-by: Troy Kisky <troy.ki...@boundarydevices.com> --- board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 31 +++++++++++++------------- 1 file changed, 15 insertions(+), 16 deletions(-)
diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg index 18cdb7b..00712c6 100644 --- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg +++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg @@ -60,6 +60,17 @@ IOMUX_ENTRY1(IOM_DRAM_SDQS4, 0x00000030) IOMUX_ENTRY1(IOM_DRAM_SDQS5, 0x00000030) IOMUX_ENTRY1(IOM_DRAM_SDQS6, 0x00000030) IOMUX_ENTRY1(IOM_DRAM_SDQS7, 0x00000030) +IOMUX_ENTRY1(IOM_GRP_B0DS, 0x00000030) +IOMUX_ENTRY1(IOM_GRP_B1DS, 0x00000030) +IOMUX_ENTRY1(IOM_GRP_B2DS, 0x00000030) +IOMUX_ENTRY1(IOM_GRP_B3DS, 0x00000030) +IOMUX_ENTRY1(IOM_GRP_B4DS, 0x00000030) +IOMUX_ENTRY1(IOM_GRP_B5DS, 0x00000030) +IOMUX_ENTRY1(IOM_GRP_B6DS, 0x00000030) +IOMUX_ENTRY1(IOM_GRP_B7DS, 0x00000030) +IOMUX_ENTRY1(IOM_GRP_ADDDS, 0x00000030) +/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ +IOMUX_ENTRY1(IOM_GRP_CTLDS, 0x00000030) IOMUX_ENTRY1(IOM_DRAM_DQM0, 0x00020030) IOMUX_ENTRY1(IOM_DRAM_DQM1, 0x00020030) @@ -78,29 +89,17 @@ IOMUX_ENTRY1(IOM_DRAM_SDCLK_1, 0x00020030) IOMUX_ENTRY1(IOM_DRAM_RESET, 0x000e0030) IOMUX_ENTRY1(IOM_DRAM_SDCKE0, 0x00003000) IOMUX_ENTRY1(IOM_DRAM_SDCKE1, 0x00003000) -IOMUX_ENTRY1(IOM_DRAM_SDBA2, 0x00000000) IOMUX_ENTRY1(IOM_DRAM_SDODT0, 0x00003030) IOMUX_ENTRY1(IOM_DRAM_SDODT1, 0x00003030) -IOMUX_ENTRY1(IOM_GRP_B0DS, 0x00000030) -IOMUX_ENTRY1(IOM_GRP_B1DS, 0x00000030) -IOMUX_ENTRY1(IOM_GRP_B2DS, 0x00000030) -IOMUX_ENTRY1(IOM_GRP_B3DS, 0x00000030) -IOMUX_ENTRY1(IOM_GRP_B4DS, 0x00000030) -IOMUX_ENTRY1(IOM_GRP_B5DS, 0x00000030) -IOMUX_ENTRY1(IOM_GRP_B6DS, 0x00000030) -IOMUX_ENTRY1(IOM_GRP_B7DS, 0x00000030) - -IOMUX_ENTRY1(IOM_GRP_ADDDS, 0x00000030) /* (differential input) */ IOMUX_ENTRY1(IOM_DDRMODE_CTL, 0x00020000) -/* disable ddr pullups */ -IOMUX_ENTRY1(IOM_GRP_DDRPKE, 0x00000000) /* (differential input) */ IOMUX_ENTRY1(IOM_GRP_DDRMODE, 0x00020000) -/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ -IOMUX_ENTRY1(IOM_GRP_CTLDS, 0x00000030) +/* disable ddr pullups */ +IOMUX_ENTRY1(IOM_GRP_DDRPKE, 0x00000000) +IOMUX_ENTRY1(IOM_DRAM_SDBA2, 0x00000000) IOMUX_ENTRY1(IOM_GRP_DDR_TYPE, 0x000C0000) /* Read data DQ Byte0-3 delay */ @@ -180,8 +179,8 @@ WRITE_ENTRY1(MMDC_P1 + MMDC_MPODTCTRL, 0x00022227) /* MPDGCTRL0/1 DQS GATE*/ WRITE_ENTRY1(MMDC_P0 + MMDC_MPDGCTRL0, 0x434B0350) -WRITE_ENTRY1(MMDC_P0 + MMDC_MPDGCTRL1, 0x034C0359) WRITE_ENTRY1(MMDC_P1 + MMDC_MPDGCTRL0, 0x434B0350) +WRITE_ENTRY1(MMDC_P0 + MMDC_MPDGCTRL1, 0x034C0359) WRITE_ENTRY1(MMDC_P1 + MMDC_MPDGCTRL1, 0x03650348) WRITE_ENTRY1(MMDC_P0 + MMDC_MPRDDLCTL, 0x4436383B) WRITE_ENTRY1(MMDC_P1 + MMDC_MPRDDLCTL, 0x39393341) -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
