Hi,
I am getting reset when using latest U-boot mainline with
mx6qsabrelite and loading a kernel.
U-Boot 2012.07-00580-g49b3962 (Sep 19 2012 - 09:56:23)
CPU: Freescale i.MX6Q rev1.0 at 792 MHz
Reset cause: POR
Board: MX6Q-Sabre Lite
DRAM: 1 GiB
WARNING: Caches not enabled
MMC: FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
Net: FEC
Hit any key to stop autoboot: 0
Using FEC device
TFTP from server 192.168.1.103; our IP address is 192.168.1.108
Filename 'uImage'.
Load address: 0x12000000
Loading: #################################################################
#################################################################
#################################################################
#########################
done
Bytes transferred = 3220080 (312270 hex)
Using FEC device
TFTP from server 192.168.1.103; our IP address is 192.168.1.108
Filename 'imx6q-sabrelite.dtb'.
Load address: 0x11ff0000
Loading: #
done
Bytes transferred = 13715 (3593 hex)
## Booting kernel from Legacy Image at 12000000 ...
Image Name: Linux-3.5.3
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3220016 Bytes = 3.1 MiB
Load Address: 10008000
Entry Point: 10008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 11ff0000
Booting using the fdt blob at 0x11ff0000
Loading Kernel Image ... OK
OK
Using Device Tree in place at 11ff0000, end 11ff6592
data abort
pc : [<4ff81fd8>] lr : [<4ff75950>]
sp : 4fd6fb90 ip : 11ff028c fp : 00000000
r10: 4ffae980 r9 : 00000000 r8 : 4fd6ff60
r7 : 11ff0000 r6 : 00000000 r5 : 00000000 r4 : 4ffae980
r3 : 00000000 r2 : 4ffa2529 r1 : 4fd6fb88 r0 : 11ff0000
Flags: nZCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot 2012.07-00580-g49b3962 (Sep 19 2012 - 09:56:23)
Does anyone experience the same issue?
Any ideas before I start bisecting this?
Thanks,
Fabio Estevam
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
