Hi Stefano,
> On 14/09/2012 17:40, Lukasz Majewski wrote:
> > Since the pmic_reg_read is the u32 value, the order in which bytes
> > are placed to form u32 value is important.
> >
> > This commit adds the reverse (which is default) and normal byte
> > order.
> >
> > Signed-off-by: Lukasz Majewski <l.majew...@samsung.com>
> > Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
> > ---
>
> Hi,
>
> > drivers/misc/pmic_i2c.c | 31 ++++++++++++++++++++++++-------
> > include/pmic.h | 3 +++
> > 2 files changed, 27 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/misc/pmic_i2c.c b/drivers/misc/pmic_i2c.c
> > index e74c372..1aa5b7b 100644
> > --- a/drivers/misc/pmic_i2c.c
> > +++ b/drivers/misc/pmic_i2c.c
> > @@ -40,13 +40,24 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32
> > val)
> > switch (pmic_i2c_tx_num) {
> > case 3:
> > - buf[0] = (val >> 16) & 0xff;
> > - buf[1] = (val >> 8) & 0xff;
> > - buf[2] = val & 0xff;
> > + if (pmic_i2c_byte_order == PMIC_BYTE_ORDER_NORMAL)
> > {
> > + buf[2] = (val >> 16) & 0xff;
> > + buf[1] = (val >> 8) & 0xff;
> > + buf[0] = val & 0xff;
> > + } else {
> > + buf[0] = (val >> 16) & 0xff;
> > + buf[1] = (val >> 8) & 0xff;
> > + buf[2] = val & 0xff;
> > + }
> > break;
> > case 2:
> > - buf[0] = (val >> 8) & 0xff;
> > - buf[1] = val & 0xff;
> > + if (pmic_i2c_byte_order == PMIC_BYTE_ORDER_NORMAL)
> > {
> > + buf[1] = (val >> 8) & 0xff;
> > + buf[0] = val & 0xff;
> > + } else {
> > + buf[0] = (val >> 8) & 0xff;
> > + buf[1] = val & 0xff;
> > + }
> > break;
> > case 1:
> > buf[0] = val & 0xff;
> > @@ -75,10 +86,16 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32
> > *val)
> > switch (pmic_i2c_tx_num) {
> > case 3:
> > - ret_val = buf[0] << 16 | buf[1] << 8 | buf[2];
> > + if (pmic_i2c_byte_order == PMIC_BYTE_ORDER_NORMAL)
> > + ret_val = buf[2] << 16 | buf[1] << 8 |
> > buf[0];
> > + else
> > + ret_val = buf[0] << 16 | buf[1] << 8 |
> > buf[2]; break;
> > case 2:
> > - ret_val = buf[0] << 8 | buf[1];
> > + if (pmic_i2c_byte_order == PMIC_BYTE_ORDER_NORMAL)
> > + ret_val = buf[1] << 8 | buf[0];
> > + else
> > + ret_val = buf[0] << 8 | buf[1];
> > break;
> > case 1:
> > ret_val = buf[0];
> > diff --git a/include/pmic.h b/include/pmic.h
> > index 6a05b40..2166f73 100644
> > --- a/include/pmic.h
> > +++ b/include/pmic.h
> > @@ -27,11 +27,13 @@
> > enum { PMIC_I2C, PMIC_SPI, };
> > enum { I2C_PMIC, I2C_NUM, };
> > enum { PMIC_READ, PMIC_WRITE, };
> > +enum { PMIC_BYTE_ORDER_REVERSED, PMIC_BYTE_ORDER_NORMAL, };
> >
> > struct p_i2c {
> > unsigned char addr;
> > unsigned char *buf;
> > unsigned char tx_num;
> > + unsigned char byte_order;
>
> I can imagine we could have the same issue with SPI and not only with
> I2C. The byte order is not strictly related to the interface type,
> and I think this should add to the "struct pmic" instead of the
> "struct p_i2c".
>
Thanks for reply.
Good point. I will move this to struct pmic.
Best regards,
Lukasz Majewski
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
