On 09/12/2012 04:10 PM, Tom Warren wrote: > This patch series adds basic (boot to cmd prompt) support for Tegra30. > This is based on the Tegra20 SPL, which initializes the AVP (ARM7TDMI > boot proc) first, then control is transferred to the CPU (A9 quad cluster). > It is based on current u-boot-tegra/next. > > Future patches will add support/drivers for MMC, USB, I2C, SPI, NAND, > and other peripherals. The Cardhu T30 board is supported initially.
I tested this on my Cardhu. I did notice one bug - the fdt_load and fdt_high environment variables (from include/configs/tegra20-common-post.h before this patch-set at least) aren't updated with correct values for Tegra30. I did try booting a kernel (after downloading it over serial) and that didn't work, but it's quite plausible that's as much a kernel issue as a U-Boot issue, so I won't worry about that for now. I will have some comments on the other patches in the series. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
