On Tue, Aug 28, 2012 at 7:18 AM, Marek Vasut <marek.va...@gmail.com> wrote: > Dear Otavio Salvador, > >> Align the SSP clock speed with oscilator to achieve higher transfer >> stability. > > This change is still pointless, unless you have user for this!
As far as I know the SPI flash uses SSP2; so it is a user of it. >> Signed-off-by: Otavio Salvador <ota...@ossystems.com.br> >> --- >> Changes in v2: >> - reword commit log to match the change description done on m28evk. >> >> board/freescale/mx28evk/mx28evk.c | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/board/freescale/mx28evk/mx28evk.c >> b/board/freescale/mx28evk/mx28evk.c index 867d3c8..d782aea 100644 >> --- a/board/freescale/mx28evk/mx28evk.c >> +++ b/board/freescale/mx28evk/mx28evk.c >> @@ -49,8 +49,8 @@ int board_early_init_f(void) >> >> /* SSP0 clock at 96MHz */ >> mx28_set_sspclk(MXC_SSPCLK0, 96000, 0); >> - /* SSP2 clock at 96MHz */ >> - mx28_set_sspclk(MXC_SSPCLK2, 96000, 0); >> + /* SSP2 clock at 160MHz */ >> + mx28_set_sspclk(MXC_SSPCLK2, 160000, 0); >> >> #ifdef CONFIG_CMD_USB >> mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT); > > Best regards, > Marek Vasut -- Otavio Salvador O.S. Systems E-mail: ota...@ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
