On Fri Aug 24, 2012 at 04:58:14PM -0700, Tom Rini wrote: > Hey all, > > The following patch series merges the davinci and omap-common SPL > frameworks into a single framework, CONFIG_SPL_FRAMEWORK along with a > few small cleanups to the code to make it a little smaller and more > flexible. The end result is that davinci can now opt in on > SPL-boots-Linux by just setting the right defines and other platforms > would just need to adapt to this framework. In my testing, davinci > gains between 300 and 700 bytes for this (not enabling the SPL OS > feature) and omap4/5/etc lose just a little bit (from the printf->puts > changes). I've tested this on omap3_beagle (xM and classic) and > omap4_panda. I don't have any davinci platforms that were previously > using SPL so I can't boot-test those changes but since everyone sets > CONFIG_SPL_MAX_SIZE, we're OK in that department. > > To make this series easier to test I've placed it on > http://github.com/trini/u-boot WIP/spl-improvements
Tested the patch series on hawkboard with new spl image. Spl boots up the u-boot image fine. Nice work :) Tested-by: Sughosh Ganu <urwithsugh...@gmail.com> -sughosh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
