On 08/23/2012 10:54 PM, Andy Fleming wrote:
This patch (commit 20959471b5d07fdeb8603b918d80385aa2954711), strangely, causes the error below to happen when I build P1010RDB_36BIT_NAND:Configuring for P1010RDB_36BIT_NAND - Board: P1010RDB, Options: P1010RDB,36BIT,N AND make[1]: *** [/local/afleming/u-boot/nand_spl/u-boot-spl] Error 1 make: *** [nand_spl] Error 2 /opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux-gnu/bin/powerpc -linux-gnu-size: './u-boot': No such file /opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux-gnu/bin/powerpc -linux-gnu-ld: section .bootpg loaded at [00000000ff801000,00000000ff80120f] ove rlaps section .data loaded at [00000000ff800e90,00000000ff80102b] make[1]: *** [/local/afleming/u-boot/nand_spl/u-boot-spl] Error 1 make: *** [nand_spl] Error 2 make: *** Waiting for unfinished jobs.... ${CROSS_COMPILE}gcc --version: powerpc-linux-gnu-gcc (Sourcery G++ Lite 2010.09-55) 4.5.1 I'm guessing this change increased the amount of inlining. Sadly, the subsequent patches, which were intended to shrink the SPL build, were not enough to fix this problem. My inclination is to revert this patch until we figure out what went wrong. On Wed, Apr 11, 2012 at 3:49 AM, Prabhakar Kushwaha <prabha...@freescale.com> wrote:Prototype declaration of I/O operation functions are not correct. as both 'extern' and function definition are at same place. Chage protoype declaration as static. Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com>
if this patch is creating problem. Please revert it, till a proper solution is not found.
Thanks, Prabhakar _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
