This patch (commit 20959471b5d07fdeb8603b918d80385aa2954711),
strangely, causes the error below to happen when I build
P1010RDB_36BIT_NAND:
Configuring for P1010RDB_36BIT_NAND - Board: P1010RDB, Options: P1010RDB,36BIT,N
AND
make[1]: *** [/local/afleming/u-boot/nand_spl/u-boot-spl] Error 1
make: *** [nand_spl] Error 2
/opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux-gnu/bin/powerpc
-linux-gnu-size: './u-boot': No such file
/opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux-gnu/bin/powerpc
-linux-gnu-ld: section .bootpg loaded at [00000000ff801000,00000000ff80120f] ove
rlaps section .data loaded at [00000000ff800e90,00000000ff80102b]
make[1]: *** [/local/afleming/u-boot/nand_spl/u-boot-spl] Error 1
make: *** [nand_spl] Error 2
make: *** Waiting for unfinished jobs....
${CROSS_COMPILE}gcc --version:
powerpc-linux-gnu-gcc (Sourcery G++ Lite 2010.09-55) 4.5.1
I'm guessing this change increased the amount of inlining. Sadly, the
subsequent patches, which were intended to shrink the SPL build, were
not enough to fix this problem.
My inclination is to revert this patch until we figure out what went wrong.
On Wed, Apr 11, 2012 at 3:49 AM, Prabhakar Kushwaha
<prabha...@freescale.com> wrote:
> Prototype declaration of I/O operation functions are not correct. as both
> 'extern' and function definition are at same place.
>
> Chage protoype declaration as static.
>
> Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
