Hi Tom, On Wednesday 22 August 2012 03:34 PM, Christian Riesch wrote: > Hi Tom, > > On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini <tr...@ti.com> wrote: >> - Convert the non-relocation part of board_init_f to spl_board_init, >> turn on CONFIG_SPL_BOARD_INIT in the configs. >> - Remove duplicated code. >> - Add spl_boot_device() that returns the statically chosen boot device. > > I tested the patchset on the LogicPD AM1808 experimenter's kit: > > make da850evm > and flashing to SPI flash with > mono sfh_OMAP-L138.exe -targetType AM1808 -p /dev/ttyUSB0 -flash_noubl > u-boot.ais > I tried testing the same on omap-l138 (the entire patch set) for SPI boot mode itsef, unfortunately the board doesn't even come up. Any Ideas ?
Thx, --Prabhakar > The board boots up fine, but after pressing the reset button or > issuing the u-boot "reset" command, it is dead. Only power-cycling > helps. Before enabling the SPL framework in this patch reset works > fine. Any ideas? > > Regards, Christian > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
