Allows for easy configuration of the VBUS indicator related ULPI config bits.
Also move the external indicator setup from ulpi_set_vbus() to the new function. Signed-off-by: Lucas Stach <d...@lynxeye.de> --- drivers/usb/ulpi/ulpi.c | 26 ++++++++++++++++++++++---- include/usb/ulpi.h | 13 +++++++++++-- 2 Dateien geändert, 33 Zeilen hinzugefügt(+), 6 Zeilen entfernt(-) diff --git a/drivers/usb/ulpi/ulpi.c b/drivers/usb/ulpi/ulpi.c index dde2585..f358bde 100644 --- a/drivers/usb/ulpi/ulpi.c +++ b/drivers/usb/ulpi/ulpi.c @@ -106,20 +106,38 @@ int ulpi_select_transceiver(struct ulpi_viewport *ulpi_vp, unsigned speed) return ulpi_write(ulpi_vp, &ulpi->function_ctrl, val); } -int ulpi_set_vbus(struct ulpi_viewport *ulpi_vp, int on, int ext_power, - int ext_ind) +int ulpi_set_vbus(struct ulpi_viewport *ulpi_vp, int on, int ext_power) { u32 flags = ULPI_OTG_DRVVBUS; u8 *reg = on ? &ulpi->otg_ctrl_set : &ulpi->otg_ctrl_clear; if (ext_power) flags |= ULPI_OTG_DRVVBUS_EXT; - if (ext_ind) - flags |= ULPI_OTG_EXTVBUSIND; return ulpi_write(ulpi_vp, reg, flags); } +int ulpi_set_vbus_indicator(struct ulpi_viewport *ulpi_vp, int external, + int passthu, int complement) +{ + u8 *reg; + int ret; + + reg = external ? &ulpi->otg_ctrl_set : &ulpi->otg_ctrl_clear; + if ((ret = ulpi_write(ulpi_vp, reg, ULPI_OTG_EXTVBUSIND))) + return ret; + + reg = passthu ? &ulpi->iface_ctrl_set : &ulpi->iface_ctrl_clear; + if ((ret = ulpi_write(ulpi_vp, reg, ULPI_IFACE_PASSTHRU))) + return ret; + + reg = complement ? &ulpi->iface_ctrl_set : &ulpi->iface_ctrl_clear; + if ((ret = ulpi_write(ulpi_vp, reg, ULPI_IFACE_EXTVBUS_COMPLEMENT))) + return ret; + + return 0; +} + int ulpi_set_pd(struct ulpi_viewport *ulpi_vp, int enable) { u32 val = ULPI_OTG_DP_PULLDOWN | ULPI_OTG_DM_PULLDOWN; diff --git a/include/usb/ulpi.h b/include/usb/ulpi.h index 9a75c24..99166c4 100644 --- a/include/usb/ulpi.h +++ b/include/usb/ulpi.h @@ -61,8 +61,17 @@ int ulpi_select_transceiver(struct ulpi_viewport *ulpi_vp, unsigned speed); * * returns 0 on success, ULPI_ERROR on failure. */ -int ulpi_set_vbus(struct ulpi_viewport *ulpi_vp, - int on, int ext_power, int ext_ind); +int ulpi_set_vbus(struct ulpi_viewport *ulpi_vp, int on, int ext_power); + +/* + * Configure VBUS indicator + * @external - external VBUS over-current indicator is used + * @passthru - disables ANDing of internal VBUS comparator + * with external VBUS input + * @complement - inverts the external VBUS input + */ +int ulpi_set_vbus_indicator(struct ulpi_viewport *ulpi_vp, int external, + int passthru, int complement); /* * Enable/disable pull-down resistors on D+ and D- USB lines. -- 1.7.11.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot