With this series we are able to initialize USB controllers using an external ULPI phy AKA USB2 on Tegra 2 devices.
This was tested to work on a Toradex Colibri T20 board, where USB2 is used to access the ASIX ethernet chipset. Testing was done with "tegra20: usb: rework set_host_mode" [1] applied. I did not spot any regressions on the UTMI ports. v2 incorporates all the review feedback I've got so far, including now trying harder to enable VBus in all configurations. Patch 3 is already in u-boot-usb and only provided as the ULPI init code now depends on it. Igor could you please take a look at Patch 4? Patchset is based on top of u-boot-tegra/next [1] http://lists.denx.de/pipermail/u-boot/2012-August/130177.html Lucas Stach (5): tegra20: complete periph_id enum tegra20: add clock_set_pllout function usb: fix ulpi_set_vbus prototype usb: ulpi: add indicator configuration function tegra20: add USB ULPI init code arch/arm/cpu/armv7/tegra20/usb.c | 154 +++++++++++++++++++++++----- arch/arm/cpu/tegra20-common/clock.c | 39 +++++++ arch/arm/cpu/tegra20-common/warmboot_avp.c | 2 +- arch/arm/include/asm/arch-tegra20/clk_rst.h | 11 +- arch/arm/include/asm/arch-tegra20/clock.h | 25 +++++ arch/arm/include/asm/arch-tegra20/usb.h | 29 +++++- drivers/usb/ulpi/ulpi.c | 26 ++++- include/usb/ulpi.h | 13 ++- 8 Dateien geändert, 262 Zeilen hinzugefügt(+), 37 Zeilen entfernt(-) -- 1.7.11.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot