On 14/08/2012 17:18, Benoît Thébaudeau wrote: > Coding style cleanup: > - Remove useless parentheses. > - Use tabs for indentations and alignments. > > Signed-off-by: Benoît Thébaudeau <benoit.thebaud...@advansee.com> > Cc: Stefano Babic <sba...@denx.de> > --- > Changes for v2: > - Make patch description more detailed. > > .../arch/arm/cpu/armv7/mx5/lowlevel_init.S | 46 > ++++++++++---------- > 1 file changed, 23 insertions(+), 23 deletions(-) > > diff --git u-boot-4d3c95f.orig/arch/arm/cpu/armv7/mx5/lowlevel_init.S > u-boot-4d3c95f/arch/arm/cpu/armv7/mx5/lowlevel_init.S > index 683a7b5..a40b84f 100644 > --- u-boot-4d3c95f.orig/arch/arm/cpu/armv7/mx5/lowlevel_init.S > +++ u-boot-4d3c95f/arch/arm/cpu/armv7/mx5/lowlevel_init.S > @@ -36,9 +36,9 @@ > /* reconfigure L2 cache aux control reg */ > mov r0, #0xC0 /* tag RAM */ > add r0, r0, #0x4 /* data RAM */ > - orr r0, r0, #(1 << 24) /* disable write allocate delay */ > - orr r0, r0, #(1 << 23) /* disable write allocate combine */ > - orr r0, r0, #(1 << 22) /* disable write allocate */ > + orr r0, r0, #1 << 24 /* disable write allocate delay */ > + orr r0, r0, #1 << 23 /* disable write allocate combine */ > + orr r0, r0, #1 << 22 /* disable write allocate */ > > #if defined(CONFIG_MX51) > ldr r1, =0x0 > @@ -46,7 +46,7 @@ > cmp r3, #0x10 > > /* disable write combine for TO 2 and lower revs */ > - orrls r0, r0, #(1 << 25) > + orrls r0, r0, #1 << 25 > #endif > > mcr 15, 1, r0, c9, c0, 2 > @@ -247,9 +247,9 @@ > movhi r1, #0 > #else > mov r1, #0 > - > #endif > str r1, [r0, #CLKCTL_CACRR] > + > /* Switch ARM back to PLL 1 */ > mov r1, #0 > str r1, [r0, #CLKCTL_CCSR] > @@ -288,9 +288,9 @@ > /* Switch peripheral to PLL2 */ > ldr r0, =CCM_BASE_ADDR > ldr r1, =0x00808145 > - orr r1, r1, #(2 << 10) > - orr r1, r1, #(0 << 16) > - orr r1, r1, #(1 << 19) > + orr r1, r1, #2 << 10 > + orr r1, r1, #0 << 16 > + orr r1, r1, #1 << 19 > str r1, [r0, #CLKCTL_CBCDR] > > ldr r1, =0x00016154 > @@ -331,10 +331,10 @@ ENTRY(lowlevel_init) > #if defined(CONFIG_MX51) > ldr r0, =GPIO1_BASE_ADDR > ldr r1, [r0, #0x0] > - orr r1, r1, #(1 << 23) > + orr r1, r1, #1 << 23 > str r1, [r0, #0x0] > ldr r1, [r0, #0x4] > - orr r1, r1, #(1 << 23) > + orr r1, r1, #1 << 23 > str r1, [r0, #0x4] > #endif > > @@ -351,16 +351,16 @@ ENTRY(lowlevel_init) > ENDPROC(lowlevel_init) > > /* Board level setting value */ > -W_DP_OP_864: .word DP_OP_864 > -W_DP_MFD_864: .word DP_MFD_864 > -W_DP_MFN_864: .word DP_MFN_864 > -W_DP_MFN_800_DIT: .word DP_MFN_800_DIT > -W_DP_OP_800: .word DP_OP_800 > -W_DP_MFD_800: .word DP_MFD_800 > -W_DP_MFN_800: .word DP_MFN_800 > -W_DP_OP_665: .word DP_OP_665 > -W_DP_MFD_665: .word DP_MFD_665 > -W_DP_MFN_665: .word DP_MFN_665 > -W_DP_OP_216: .word DP_OP_216 > -W_DP_MFD_216: .word DP_MFD_216 > -W_DP_MFN_216: .word DP_MFN_216 > +W_DP_OP_864: .word DP_OP_864 > +W_DP_MFD_864: .word DP_MFD_864 > +W_DP_MFN_864: .word DP_MFN_864 > +W_DP_MFN_800_DIT: .word DP_MFN_800_DIT > +W_DP_OP_800: .word DP_OP_800 > +W_DP_MFD_800: .word DP_MFD_800 > +W_DP_MFN_800: .word DP_MFN_800 > +W_DP_OP_665: .word DP_OP_665 > +W_DP_MFD_665: .word DP_MFD_665 > +W_DP_MFN_665: .word DP_MFN_665 > +W_DP_OP_216: .word DP_OP_216 > +W_DP_MFD_216: .word DP_MFD_216 > +W_DP_MFN_216: .word DP_MFN_216 >
Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
