The mx5 lowlevel_init.S contains board-specific code based on the reference
design. Let's keep it since it avoids creating new lowlevel_init files and it
may be used by many boards. But add a config to make it optional in order not to
cause issues on boards not following this part of the reference design.
Signed-off-by: Benoît Thébaudeau <benoit.thebaud...@advansee.com>
Cc: Stefano Babic <sba...@denx.de>
---
.../arch/arm/cpu/armv7/mx5/lowlevel_init.S | 2 +-
.../doc/README.imx5 | 5 +++++
.../include/configs/efikamx.h | 1 +
.../include/configs/mx51evk.h | 1 +
.../include/configs/vision2.h | 1 +
5 files changed, 9 insertions(+), 1 deletion(-)
diff --git u-boot-4d3c95f.orig/arch/arm/cpu/armv7/mx5/lowlevel_init.S
u-boot-4d3c95f/arch/arm/cpu/armv7/mx5/lowlevel_init.S
index d0f75fa..b25b3a7 100644
--- u-boot-4d3c95f.orig/arch/arm/cpu/armv7/mx5/lowlevel_init.S
+++ u-boot-4d3c95f/arch/arm/cpu/armv7/mx5/lowlevel_init.S
@@ -330,7 +330,7 @@ ENTRY(lowlevel_init)
mov r10, lr
mov r4, #0 /* Fix R4 to 0 */
-#if defined(CONFIG_MX51)
+#if defined(CONFIG_SYS_MAIN_PWR_ON)
ldr r0, =GPIO1_BASE_ADDR
ldr r1, [r0, #0x0]
orr r1, r1, #1 << 23
diff --git u-boot-4d3c95f.orig/doc/README.imx5 u-boot-4d3c95f/doc/README.imx5
index 938d3da..85d476f 100644
--- u-boot-4d3c95f.orig/doc/README.imx5
+++ u-boot-4d3c95f/doc/README.imx5
@@ -20,3 +20,8 @@ i.MX5x SoCs.
mode), which causes the effect of this failure to be much lower (in terms
of frequency deviation), avoiding system failure, or at least decreasing
the likelihood of system failure.
+
+1.3 CONFIG_SYS_MAIN_PWR_ON: Trigger MAIN_PWR_ON upon startup.
+ This option should be enabled for boards having a SYS_ON_OFF_CTL signal
+ connected to GPIO1[23] and triggering the MAIN_PWR_ON signal like in the
+ reference designs.
diff --git u-boot-4d3c95f.orig/include/configs/efikamx.h
u-boot-4d3c95f/include/configs/efikamx.h
index 143b0f0..792b51b 100644
--- u-boot-4d3c95f.orig/include/configs/efikamx.h
+++ u-boot-4d3c95f/include/configs/efikamx.h
@@ -270,5 +270,6 @@
#define CONFIG_SYS_DDR_CLKSEL 0
#define CONFIG_SYS_CLKTL_CBCDR 0x59E35145
+#define CONFIG_SYS_MAIN_PWR_ON
#endif
diff --git u-boot-4d3c95f.orig/include/configs/mx51evk.h
u-boot-4d3c95f/include/configs/mx51evk.h
index e975f54..6867f7b 100644
--- u-boot-4d3c95f.orig/include/configs/mx51evk.h
+++ u-boot-4d3c95f/include/configs/mx51evk.h
@@ -242,6 +242,7 @@
#define CONFIG_SYS_DDR_CLKSEL 0
#define CONFIG_SYS_CLKTL_CBCDR 0x59E35100
+#define CONFIG_SYS_MAIN_PWR_ON
/*-----------------------------------------------------------------------
* FLASH and environment organization
diff --git u-boot-4d3c95f.orig/include/configs/vision2.h
u-boot-4d3c95f/include/configs/vision2.h
index ed004a6..3ce4906 100644
--- u-boot-4d3c95f.orig/include/configs/vision2.h
+++ u-boot-4d3c95f/include/configs/vision2.h
@@ -203,6 +203,7 @@
/* 166 MHz DDR RAM */
#define CONFIG_SYS_DDR_CLKSEL 0
#define CONFIG_SYS_CLKTL_CBCDR 0x19239100
+#define CONFIG_SYS_MAIN_PWR_ON
#define CONFIG_SYS_NO_FLASH
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
