Hi Tom,
On Fri, 17 Aug 2012 14:52:01 -0700, Tom Rini <tr...@ti.com> wrote:
> Hello,
>
> This replaces my previous pull-request and is new warning free on
> MAKEALL -a arm for ELDK4.2/5.1/5.2.1.
>
> The following changes since commit
> 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:
>
> zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-staging tr...@ti.com
>
> for you to fetch changes up to
> 5d26e4de33fab7b132e8a8036ac54176f537d79f:
>
> ARM: add Raspberry Pi model B board, using BCM2835 SoC (2012-08-15
> 09:43:47 -0700)
>
> ----------------------------------------------------------------
> John Rigby (1):
> u8500: Separating mmc config parameters from driver
>
> Mathieu J. Poirier (10):
> snowball: Add support for ux500 based snowball board
> u8500: Moving prcmu to cpu directory
> snowball: Adding architecture dependent initialisation
> snowball: Adding CPU clock initialisation
> snowball: Moving to ux500.v2 addess scheme for PRCMU access
> snowball: applying power to LAN and GBF controllers
> u8500: Moving processor-specific functions to cpu area.
> u8500: Enabling power to MMC device on AB8500 V2
> armv7: Adding cpu specific cache managmenent
> snowball: Adding board specific cache cleanup routine
>
> Stephen Warren (4):
> README: fix references to config_cmd_default.h
> ARM: arm1176: enable instruction cache in arch_cpu_init()
> ARM: add basic support for the Broadcom BCM2835 SoC
> ARM: add Raspberry Pi model B board, using BCM2835 SoC
>
> MAINTAINERS | 8 +
> README | 4 +-
> arch/arm/cpu/arm1176/bcm2835/Makefile | 37 +
> arch/arm/cpu/arm1176/bcm2835/config.mk | 19 +
> arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S | 19 +
> arch/arm/cpu/arm1176/bcm2835/reset.c | 35 +
> arch/arm/cpu/arm1176/bcm2835/timer.c | 55 ++
> arch/arm/cpu/arm1176/cpu.c | 7 +
> arch/arm/cpu/armv7/cpu.c | 8 +
> arch/arm/cpu/armv7/u8500/Makefile | 2 +-
> arch/arm/cpu/armv7/u8500/clock.c | 34 +
> arch/arm/cpu/armv7/u8500/cpu.c | 192 +++++
> .../arm/cpu/armv7}/u8500/prcmu.c | 128 +++-
> arch/arm/include/asm/arch-bcm2835/gpio.h | 66 ++
> arch/arm/include/asm/arch-bcm2835/timer.h | 37 +
> arch/arm/include/asm/arch-bcm2835/wdog.h | 36 +
> arch/arm/include/asm/arch-u8500/clock.h | 5 +-
> arch/arm/include/asm/arch-u8500/db8500_gpio.h | 42 ++
> arch/arm/include/asm/arch-u8500/db8500_pincfg.h | 170 +++++
> arch/arm/include/asm/arch-u8500/hardware.h | 33 +-
> .../arm/include/asm/arch-u8500/prcmu.h | 35 +-
> arch/arm/include/asm/arch-u8500/sys_proto.h | 1 +
> board/armltd/vexpress/ca9x4_ct_vxp.c | 21 +-
> board/raspberrypi/rpi_b/Makefile | 34 +
> board/raspberrypi/rpi_b/rpi_b.c | 34 +
> board/st-ericsson/snowball/Makefile | 49 ++
> board/st-ericsson/snowball/db8500_pins.h | 745
> ++++++++++++++++++++
> board/st-ericsson/snowball/snowball.c | 348 +++++++++
> board/st-ericsson/u8500/Makefile | 2 +-
> board/st-ericsson/u8500/u8500_href.c | 100 +--
> boards.cfg | 2 +
> drivers/gpio/Makefile | 2 +
> drivers/gpio/bcm2835_gpio.c | 89 +++
> drivers/gpio/db8500_gpio.c | 221 ++++++
> drivers/mmc/arm_pl180_mmci.c | 131 ++--
> drivers/mmc/arm_pl180_mmci.h | 27 +-
> drivers/serial/serial_pl01x.c | 2 +
> include/configs/rpi_b.h | 104 +++
> include/configs/snowball.h | 266 +++++++ 39
> files changed, 2937 insertions(+), 213 deletions(-) create mode
> 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644
> arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644
> arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644
> arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644
> arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644
> arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson =>
> arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644
> arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644
> arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644
> arch/arm/include/asm/arch-bcm2835/wdog.h create mode 100644
> arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644
> arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename
> board/st-ericsson/u8500/prcmu-fw.h =>
> arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644
> board/raspberrypi/rpi_b/Makefile create mode 100644
> board/raspberrypi/rpi_b/rpi_b.c create mode 100644
> board/st-ericsson/snowball/Makefile create mode 100644
> board/st-ericsson/snowball/db8500_pins.h create mode 100644
> board/st-ericsson/snowball/snowball.c create mode 100644
> drivers/gpio/bcm2835_gpio.c create mode 100644
> drivers/gpio/db8500_gpio.c create mode 100644 include/configs/rpi_b.h
> create mode 100644 include/configs/snowball.h
>
Are you sure you want me to only pull the top 15 patches of
u-boot-staging/tr...@ti.com, but not the tens of ones that that are
below it in u-boot-staging/master? These are nowhere else, especially
not in u-boot/master, so I am wondering why your your request takes
staging/master as its base.
Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
