Hi Stefano,
> On 14/08/2012 17:30, Benoît Thébaudeau wrote:
> > Do not pretend to have initialized mmc successfully if
> > CONFIG_FSL_ESDHC is not
> > defined.
> >
> > Signed-off-by: Benoît Thébaudeau <benoit.thebaud...@advansee.com>
> > Cc: Stefano Babic <sba...@denx.de>
> > ---
>
> Hi Benoît,
>
> > .../arch/arm/cpu/armv7/imx-common/cpu.c | 8 +++++---
> > 1 file changed, 5 insertions(+), 3 deletions(-)
> >
> > diff --git u-boot-4d3c95f.orig/arch/arm/cpu/armv7/imx-common/cpu.c
> > u-boot-4d3c95f/arch/arm/cpu/armv7/imx-common/cpu.c
> > index b3195dd..e736e9a 100644
> > --- u-boot-4d3c95f.orig/arch/arm/cpu/armv7/imx-common/cpu.c
> > +++ u-boot-4d3c95f/arch/arm/cpu/armv7/imx-common/cpu.c
> > @@ -117,11 +117,13 @@ int cpu_eth_init(bd_t *bis)
> > */
>
> Let's see if we can even make it more readable. This is for i.MX5 and
> i.MX6. The only way to get it working is to set CONFIG_FSL_ESDHC.
> There
> is no other driver available.
>
> > int cpu_mmc_init(bd_t *bis)
> > {
> > + int rc = -ENODEV;
> > +
> > #ifdef CONFIG_FSL_ESDHC
> > - return fsl_esdhc_mmc_init(bis);
> > -#else
> > - return 0;
> > + rc = fsl_esdhc_mmc_init(bis);
> > #endif
> > +
> > + return rc;
> > }
> >
>
> Then why not:
>
> ifdef CONFIG_FSL_ESDHC
> int cpu_mmc_init(bd_t *bis)
> {
> return fsl_esdhc_mmc_init(bis);
> }
> #endif
This sounds good. I'll do that and update the corresponding patches for all
i.MXs.
Best regards,
Benoît
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
