This allows a watchdog reset to start the ROM's
usb downloader, or boot from an sdcard.

Signed-off-by: Troy Kisky <troy.ki...@boundarydevices.com>
---
 board/freescale/mx6qsabrelite/mx6qsabrelite.c |   14 ++++++++++++++
 include/configs/mx6qsabrelite.h               |    3 +++
 2 files changed, 17 insertions(+)

diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c 
b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index a1e3acc..cb85597 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -30,6 +30,7 @@
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>
 #include <asm/imx-common/mxc_i2c.h>
+#include <asm/imx-common/boot_mode.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <micrel.h>
@@ -488,10 +489,23 @@ static void preboot_keys(void)
 }
 #endif
 
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+       /* 4 bit bus width */
+       {"mmc0",        MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+       {"mmc1",        MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
+       {NULL,          0},
+};
+#endif
+
 int misc_init_r(void)
 {
 #ifdef CONFIG_PREBOOT
        preboot_keys();
 #endif
+
+#ifdef CONFIG_CMD_BMODE
+       add_board_boot_modes(board_boot_modes);
+#endif
        return 0;
 }
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 0d376ba..782abc8 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -117,6 +117,9 @@
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 
+/* Miscellaneous commands */
+#define CONFIG_CMD_BMODE
+
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX             1
-- 
1.7.9.5

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to