The elftosb call needs to use a target param specific for i.MX28. This
patch allow for later addition of i.MX233.
Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
Makefile | 5 ++++-
arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot.bd.imx28} | 0
2 files changed, 4 insertions(+), 1 deletion(-)
rename arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot.bd.imx28} (100%)
diff --git a/Makefile b/Makefile
index f6471e2..5f11bb7 100644
--- a/Makefile
+++ b/Makefile
@@ -452,8 +452,11 @@ $(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin
$(obj)u-boot.bin
cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.bin > \
$(obj)u-boot.ais
+# Specify the target for use in elftosb call
+ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
+
$(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
- elftosb -zdf imx28 -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot.bd \
+ elftosb -zdf $(ELFTOSB_TARGET-y) -c
$(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot.bd.$(ELFTOSB_TARGET-y) \
-o $(obj)u-boot.sb
# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot.bd
b/arch/arm/cpu/arm926ejs/mxs/u-boot.bd.imx28
similarity index 100%
rename from arch/arm/cpu/arm926ejs/mxs/u-boot.bd
rename to arch/arm/cpu/arm926ejs/mxs/u-boot.bd.imx28
--
1.7.10.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
