Hi Andreas, On Wed, 8 Aug 2012 00:29:12 +0200, Andreas Bießmann <andreas.de...@googlemail.com> wrote:
> The following changes since commit > 8abcd8ab962cd5fb2a4c025e7c7b62a9faf4aa08: > > DaVinci DA8xx: fix set_cpu_clk_info() (2012-08-05 22:02:40 +0200) > > are available in the git repository at: > > git://git.denx.de/u-boot-atmel.git master > > for you to fetch changes up to > 17cda15fa6fb3ab2433bed951dad5c4ab30d8cbc: > > at91: Add support for taskit AT91SAM9G20 boards. (2012-08-07 > 23:47:29 +0200) > > ---------------------------------------------------------------- > Andreas Bießmann (3): > doc/git-mailrc: update at91 and avr32 > MAINTAINERS: fix entry of Ilko Iliev > MAINTAINERS: fix Andreas Bießmann AVR32 entry > > Bo Shen (1): > arm : Atmel : add at91sam9x5ek board support > > Markus Hubig (2): > Enable the EMAC clock in at91_macb_hw_init(). > at91: Add support for taskit AT91SAM9G20 boards. > > MAINTAINERS | 23 +- > arch/arm/cpu/arm926ejs/at91/Makefile | 1 + > arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 4 + > arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 232 > ++++++++++++++++ arch/arm/cpu/arm926ejs/at91/clock.c > | 12 +- arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 + > arch/arm/include/asm/arch-at91/at91sam9x5.h | 170 > ++++++++++++ arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h | > 91 ++++++ arch/arm/include/asm/arch-at91/hardware.h | 2 + > board/atmel/at91sam9x5ek/Makefile | 52 ++++ > board/atmel/at91sam9x5ek/at91sam9x5ek.c | 293 > ++++++++++++++++++++ > board/atmel/at91sam9x5ek/config.mk | 1 + > board/taskit/stamp9g20/Makefile | 53 ++++ > board/taskit/stamp9g20/led.c | 138 +++++++++ > board/taskit/stamp9g20/stamp9g20.c | 191 > +++++++++++++ boards.cfg | > 3 + doc/git-mailrc | 5 +- > drivers/net/macb.c | 4 +- > include/configs/at91sam9x5ek.h | 183 > ++++++++++++ include/configs/stamp9g20.h | > 266 ++++++++++++++++++ 20 files changed, 1713 insertions(+), 13 > deletions(-) create mode 100644 > arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c create mode 100644 > arch/arm/include/asm/arch-at91/at91sam9x5.h create mode 100644 > arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h create mode 100644 > board/atmel/at91sam9x5ek/Makefile create mode 100644 > board/atmel/at91sam9x5ek/at91sam9x5ek.c create mode 100644 > board/atmel/at91sam9x5ek/config.mk create mode 100644 > board/taskit/stamp9g20/Makefile create mode 100644 > board/taskit/stamp9g20/led.c create mode 100644 > board/taskit/stamp9g20/stamp9g20.c create mode 100644 > include/configs/at91sam9x5ek.h create mode 100644 > include/configs/stamp9g20.h > Applied to u-boot-arm/master, thanks! Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
