Hi Andreas, On Sat, 1 Sep 2012 16:50:25 +0200, Andreas Bießmann <andreas.de...@googlemail.com> wrote:
> Dear Albert Aribaud, > > The following changes since commit > d602b7a6b94628004fdefb7932a24185346b030b: > > fsl_esdhc: Remove cache snooping for i.MX (2012-09-01 13:50:35 > +0200) > > are available in the git repository at: > > git://git.denx.de/u-boot-atmel.git master > > for you to fetch changes up to > cc443d073801c8fd57d74954d61120214b960d61: > > at91: 9x5: Enable PMECC for 5series ek board. (2012-09-01 16:43:53 > +0200) > > ---------------------------------------------------------------- > Andreas Bießmann (3): > at91sam9263ek: fix 'update' script > at91sam9263ek: remove unnecessary console_init_f > arm:at91-boards: remove console_init_f where unnecessary > > Bo Shen (7): > ARM : at91sam9x5 : Remove CONFIG_ARCH_CPU_INIT > arm : at91sam9x5 : fix a small bug for NAND > Take over the maintainer for sam9g10 and sam9m10g45 > atmel: at91sam9x5: fix name error for spi > spi: atmel: add WDRBT bit to avoid receive overrun > arm: sam9g10/sam9m10g45: remove CONFIG_ARCH_CPU_INIT > atmel: at91sam9x5: add spi flash boot support > > Wu, Josh (5): > at91: atmel_nand: extract HWECC initialization code into one > function: atmel_hw_nand_init_param(). at91: atmel_nand: remove unused > variables. at91: atmel_nand: Update driver to support Programmable > Multibit ECC controller at91: 9x5: change SMC config timing that both > works for PMECC & non-PMECC. at91: 9x5: Enable PMECC for 5series ek > board. > > Xu, Hong (1): > AT91: Small fix on AT91 USART initialization code > > MAINTAINERS | 2 +- > arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 4 +- > board/BuS/eb_cpux9k2/cpux9k2.c | 2 - > board/BuS/vl_ma2sc/vl_ma2sc.c | 3 - > board/atmel/at91sam9261ek/at91sam9261ek.c | 3 - > board/atmel/at91sam9263ek/at91sam9263ek.c | 3 - > board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 3 - > board/atmel/at91sam9rlek/at91sam9rlek.c | 3 - > board/atmel/at91sam9x5ek/at91sam9x5ek.c | 14 +- > board/calao/sbc35_a9g20/sbc35_a9g20.c | 3 - > board/calao/tny_a9260/tny_a9260.c | 3 - > board/eukrea/cpuat91/cpuat91.c | 2 - > boards.cfg | 1 + > doc/README.atmel_pmecc | 44 ++ > drivers/mtd/nand/atmel_nand.c | 827 > ++++++++++++++++++++-- > drivers/mtd/nand/atmel_nand_ecc.h | 113 +++ > drivers/serial/atmel_usart.c | 11 +- > drivers/spi/atmel_spi.c | 3 + > drivers/spi/atmel_spi.h | 1 + > include/configs/at91sam9261ek.h | 2 - > include/configs/at91sam9263ek.h | 2 +- > include/configs/at91sam9m10g45ek.h | 1 - > include/configs/at91sam9x5ek.h | 29 +- > include/nand.h | 2 +- 24 files > changed, 974 insertions(+), 107 deletions(-) create mode 100644 > doc/README.atmel_pmecc > Applied to u-boot-arm/master, thanks! Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
