On Tue, Jul 31, 2012 at 12:59:22PM -0600, mathieu.poir...@linaro.org wrote:
> From: "Mathieu J. Poirier" <mathieu.poir...@linaro.org> > > This set adds support for the ST-Ericsson u8500 based > snowball board. Doing so it moves u8500-href code around > to allow for code reuse between boards. > > It was sent out during the 12.07 cycle but never received > an official ACK. > > John Rigby (1): > u8500: Separating mmc config parameters from driver > > Mathieu J. Poirier (10): > snowball: Add support for ux500 based snowball board > u8500: Moving prcmu to cpu directory > snowball: Adding architecture dependent initialisation > snowball: Adding CPU clock initialisation > snowball: Moving to ux500.v2 addess scheme for PRCMU access > snowball: applying power to LAN and GBF controllers > u8500: Moving processor-specific functions to cpu area. > u8500: Enabling power to MMC device on AB8500 V2 > armv7: Adding cpu specific cache managmenent > snowball: Adding board specific cache cleanup routine > > MAINTAINERS | 4 + > arch/arm/cpu/armv7/cpu.c | 8 + > arch/arm/cpu/armv7/u8500/Makefile | 2 +- > arch/arm/cpu/armv7/u8500/clock.c | 34 + > arch/arm/cpu/armv7/u8500/cpu.c | 192 ++++++ > arch/arm/cpu/armv7/u8500/prcmu.c | 229 +++++++ > arch/arm/include/asm/arch-u8500/clock.h | 5 +- > arch/arm/include/asm/arch-u8500/db8500_gpio.h | 42 ++ > arch/arm/include/asm/arch-u8500/db8500_pincfg.h | 170 +++++ > arch/arm/include/asm/arch-u8500/hardware.h | 33 +- > arch/arm/include/asm/arch-u8500/prcmu.h | 76 +++ > arch/arm/include/asm/arch-u8500/sys_proto.h | 1 + > board/armltd/vexpress/ca9x4_ct_vxp.c | 21 +- > board/st-ericsson/snowball/Makefile | 51 ++ > board/st-ericsson/snowball/db8500_pins.h | 745 > +++++++++++++++++++++++ > board/st-ericsson/snowball/snowball.c | 367 +++++++++++ > board/st-ericsson/u8500/Makefile | 2 +- > board/st-ericsson/u8500/prcmu-fw.h | 55 -- > board/st-ericsson/u8500/prcmu.c | 165 ----- > board/st-ericsson/u8500/u8500_href.c | 99 +--- > boards.cfg | 1 + > drivers/gpio/Makefile | 1 + > drivers/gpio/db8500_gpio.c | 225 +++++++ > drivers/mmc/arm_pl180_mmci.c | 132 ++--- > drivers/mmc/arm_pl180_mmci.h | 27 +- > drivers/serial/serial_pl01x.c | 2 + > include/configs/snowball.h | 268 ++++++++ > 27 files changed, 2566 insertions(+), 391 deletions(-) > create mode 100644 arch/arm/cpu/armv7/u8500/cpu.c > create mode 100644 arch/arm/cpu/armv7/u8500/prcmu.c > create mode 100644 arch/arm/include/asm/arch-u8500/db8500_gpio.h > create mode 100644 arch/arm/include/asm/arch-u8500/db8500_pincfg.h > create mode 100644 arch/arm/include/asm/arch-u8500/prcmu.h > create mode 100644 board/st-ericsson/snowball/Makefile > create mode 100644 board/st-ericsson/snowball/db8500_pins.h > create mode 100644 board/st-ericsson/snowball/snowball.c > delete mode 100644 board/st-ericsson/u8500/prcmu-fw.h > delete mode 100644 board/st-ericsson/u8500/prcmu.c > create mode 100644 drivers/gpio/db8500_gpio.c > create mode 100644 include/configs/snowball.h With a few very minor changes that I've sent to the list, I've applied this to u-boot-staging/tr...@ti.com, thanks for your patience! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot