Hi Tom, On Fri, 3 Aug 2012 09:16:26 -0700, Tom Rini <tr...@ti.com> wrote: > Hello, > > The following changes since commit 30a5f098e261b00b9c3ce43b8d4a641e106d26a0: > > Revert "arm: armv7: add compile option -mno-unaligned-access if available" > (2012-07-29 11:19:37 +0200) > > are available in the git repository at: > > git://git.denx.de/u-boot-ti master > > for you to fetch changes up to c7dd0935555429d46d28ccbb0bde81a3e2f9c86e: > > DaVinci DA8xx: fix set_cpu_clk_info() (2012-08-03 09:00:57 -0700) > > ---------------------------------------------------------------- > Chandan Nath (3): > am33xx: CPSW init and definitions > am33xx: pin mux defintions for CPSW switch > am335x_evm: CPSW support > > Cyril Chemparathy (1): > cpsw: add driver for cpsw ethernet device > > Ilya Yanok (1): > am335x_evm: read the on-board EEPROM > > Javier Martinez Canillas (3): > OMAP3: igep00x0: Add config option to choose flash storage memory > OMAP3: mem: Add Numonyx OneNAND 200MHz timing information > OMAP3: igep00x0: add SPL support for IGEP-based boards > > Laurence Withers (4): > DaVinci DA8xx: tidy up clock ID definition > DaVinci DA850: UART2 clock ID comes from ASYNC3 > DaVinci DA8xx: replace magic number for DDR speed > DaVinci DA8xx: fix set_cpu_clk_info() > > Marek Vasut (2): > dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP > dm: Move OMAP GPIO driver to drivers/gpio/ > > Mikhail Kshevetskiy (3): > arm/davinci: fix DDR2/mDDR memory controller initialization for Omap > L138 > arm/davinci/da850: add uart0 pinmux > serial/ns16550: ns16550 has a different register layout on SOC_DA8XX > > Peter Meerwald (1): > beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3 > > Tom Rini (25): > am33xx: Enable gpio0 clock > am335x_evm: Update config for common usage > am33xx: Remove DMM_BASE define > am33xx: Convert to using <asm/emif.h> to describe the EMIF > am33xx: Remove extra check in enable_ddr_clocks > am33xx: Bugfix to config_sdram() > am33xx: Rework DDR2 EMIF initalization slightly > am33xx: Make config_cmd_ctrl / config_ddr_data take const structs > am33xx: Pass to config_ddr the type of memory that is connected > am33xx: Move the call to ddr_pll_config, make it take the frequency > am33xx: Clean up unused DDR defines, prefix more with 'DDR2' > am33xx: Document what we're doing with ddrctrl->ddrckectrl > am33xx: Turn a number of 'int' functions to 'void' > am33xx: Use emif_regs struct for storing initialization values > am33xx: Rework config_io_ctrl slightly > am33xx: Do not touch 'ratio1' fields > am33xx: Correct and clean up ddr_regs struct > am33xx: Move some variables in emif4.c, mark them static. > am33xx: Rework config_ddr to make DDR3 support easier. > am33xx: Add DDR3 (Micron MT41J128M16JT-125) timings and support > am33xx: Remove board/ti/am335x/evm.c > am33xx: Add support for TI AM335x StarterKit EVM > am33xx evm: Add CONFIG_CMD_EEPROM and related > am33xx: Rework pinmux functions > doc/git-mailrc: Update 'ti' alias > > Vaibhav Bedia (1): > am335x: ddr_defs: Update EMIF parameters > > arch/arm/cpu/arm926ejs/davinci/cpu.c | 22 +- > arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 26 +- > arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 5 + > arch/arm/cpu/armv7/am33xx/board.c | 194 +++- > arch/arm/cpu/armv7/am33xx/clock.c | 22 +- > arch/arm/cpu/armv7/am33xx/ddr.c | 87 +- > arch/arm/cpu/armv7/am33xx/emif4.c | 240 +++-- > arch/arm/cpu/armv7/omap-common/Makefile | 3 - > arch/arm/include/asm/arch-am33xx/common_def.h | 23 - > arch/arm/include/asm/arch-am33xx/cpu.h | 11 + > arch/arm/include/asm/arch-am33xx/ddr_defs.h | 184 ++-- > arch/arm/include/asm/arch-am33xx/hardware.h | 6 +- > arch/arm/include/asm/arch-am33xx/sys_proto.h | 29 + > arch/arm/include/asm/arch-davinci/hardware.h | 60 +- > arch/arm/include/asm/arch-davinci/pinmux_defs.h | 1 + > arch/arm/include/asm/arch-omap3/mem.h | 29 + > arch/arm/include/asm/emif.h | 8 +- > board/isee/igep0020/config.mk | 33 - > board/isee/igep0020/igep0020.c | 42 +- > board/isee/igep0020/igep0020.h | 4 + > board/isee/igep0030/config.mk | 33 - > board/isee/igep0030/igep0030.c | 42 +- > board/isee/igep0030/igep0030.h | 4 + > board/ti/am335x/Makefile | 4 +- > board/ti/am335x/evm.c | 40 - > board/ti/am335x/mux.c | 87 +- > board/ti/beagle/beagle.c | 4 + > boards.cfg | 6 +- > doc/git-mailrc | 2 +- > drivers/gpio/Makefile | 1 + > .../omap-common/gpio.c => drivers/gpio/omap_gpio.c | 0 > drivers/net/Makefile | 1 + > drivers/net/cpsw.c | 991 > ++++++++++++++++++++ > drivers/serial/ns16550.c | 2 +- > include/configs/am335x_evm.h | 97 +- > include/configs/cm_t35.h | 1 + > include/configs/devkit8000.h | 3 + > include/configs/dig297.h | 1 + > include/configs/igep00x0.h | 85 ++ > include/configs/mcx.h | 1 + > include/configs/omap3_beagle.h | 2 + > include/configs/omap3_evm_common.h | 1 + > include/configs/omap3_logic.h | 1 + > include/configs/omap3_mvblx.h | 1 + > include/configs/omap3_overo.h | 2 + > include/configs/omap3_pandora.h | 1 + > include/configs/omap3_zoom2.h | 1 + > include/configs/omap4_common.h | 2 + > include/configs/omap5_evm.h | 1 + > include/configs/tam3517-common.h | 2 + > include/cpsw.h | 51 + > include/ns16550.h | 9 + > 52 files changed, 1984 insertions(+), 524 deletions(-) > delete mode 100644 arch/arm/include/asm/arch-am33xx/common_def.h > delete mode 100644 board/isee/igep0020/config.mk > delete mode 100644 board/isee/igep0030/config.mk > delete mode 100644 board/ti/am335x/evm.c > rename arch/arm/cpu/armv7/omap-common/gpio.c => drivers/gpio/omap_gpio.c > (100%) > create mode 100644 drivers/net/cpsw.c > create mode 100644 include/cpsw.h > > Please note that my tree is based on current u-boot-arm/next and I've > updated my next and master branches to the same content. I also did a > quick test and all of these merge easily onto Wolfgang's current tree. > > Thanks!
Applied to u-boot-arm/next moved into u-bootarm/master and above u-boot/master, thanks! Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
