> -----Original Message----- > From: Karl O. Pinc [mailto:k...@meme.com] > Sent: 01 August 2012 21:13 > To: u-boot@lists.denx.de; david.c.pu...@gmail.com; Prafulla Wadaskar > Subject: Merging the pogo_e02 and sheevaplug code > > Hi, > > I'm looking at possibly merging the pogo_e02 and sheevaplug code > and have some general questions before doing anything. > > The pogoplug POGO-E02 (pogo_e02 target) and the sheevaplug (sheevaplug > development kit) (sheevaplug target) board are very similar. > They are arm (Marvell) kirkwood boards. > The sheevaplug has 1G of ram the pogo_e02 has 256M. > Code-wise, the two boards have slightly different > kwbimage.cfg files. There is something going on in the > kwmpp_config[] array, the current pogo_e02 code omits a lot > of elements of this array that are present in the sheevaplug > but are otherwise identical. I can look into this myself > unless someone wants to hand me a clue. Finally, there's > the board initialization: board_init(void). The > sheevaplug has > gd->bd->bi_arch_number = MACH_TYPE_SHEEVAPLUG; > wheras the pogo_e02 does something different > gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
There are several other custom boards which are clone of sheevaplug and u-boot image works as it is for them. Does sheevaplug u-boot image boots as it is on pogo-plug_e02? Regards... Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
