On 02/08/2012 09:36, Dirk Behme wrote: > On 01.08.2012 13:05, Dirk Behme wrote: >> A recent Linux kernel (>= 3.5) has support for the SGTL 5000 sound >> on the SabreLite board. To make this work, U-Boot has to configure the >> pin mux for PAD_GPIO_0__CCM_CLKO and PAD_GPIO_3__CCM_CLKO2 correctly. >> >> Taken from Freescale's ER5 U-Boot for the SabreLite. >> >> Signed-off-by: Dirk Behme <dirk.be...@de.bosch.com> >> CC: Troy Kisky <troy.ki...@boundarydevices.com> >> CC: Stefano Babic <sba...@denx.de> >> --- >> board/freescale/mx6qsabrelite/imximage.cfg | 3 +++ >> 1 files changed, 3 insertions(+), 0 deletions(-) >> >> diff --git a/board/freescale/mx6qsabrelite/imximage.cfg >> b/board/freescale/mx6qsabrelite/imximage.cfg >> index 62498ab..2d7825a 100644 >> --- a/board/freescale/mx6qsabrelite/imximage.cfg >> +++ b/board/freescale/mx6qsabrelite/imximage.cfg >> @@ -168,3 +168,6 @@ DATA 4 0x020e0010 0xF00000CF >> # set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 >> DATA 4 0x020e0018 0x007F007F >> DATA 4 0x020e001c 0x007F007F >> +# set PAD_GPIO_0__CCM_CLKO and PAD_GPIO_3__CCM_CLKO2 >> +DATA 4 0x020e0220 0x00000000 >> +DATA 4 0x020e022c 0x00000004 >> \ No newline at end of file > > This is replaced with a kernel patch > > http://www.spinics.net/lists/arm-kernel/msg187222.html > > and therefore this patch is obsolete now.
Ok, thanks. Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
