>-----Original Message----- >From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] >On Behalf Of Dirk Behme >Sent: Wednesday, August 01, 2012 7:06 PM >To: u-boot@lists.denx.de >Cc: Dirk Behme >Subject: [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO >and GPIO_3__CCM_CLKO2 pin mux > >A recent Linux kernel (>= 3.5) has support for the SGTL 5000 sound on the >SabreLite board. To make this work, U-Boot has to configure the pin mux for >PAD_GPIO_0__CCM_CLKO and PAD_GPIO_3__CCM_CLKO2 correctly.
Why this can't be set in the kernel but relies on u-boot to configure it? Jason > >Taken from Freescale's ER5 U-Boot for the SabreLite. > >Signed-off-by: Dirk Behme <dirk.be...@de.bosch.com> >CC: Troy Kisky <troy.ki...@boundarydevices.com> >CC: Stefano Babic <sba...@denx.de> >--- > board/freescale/mx6qsabrelite/imximage.cfg | 3 +++ > 1 files changed, 3 insertions(+), 0 deletions(-) > >1.7.0.4 > >_______________________________________________ >U-Boot mailing list >U-Boot@lists.denx.de >http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
