That did it! Thanks.
Bill
On 7/30/2012 3:59 PM, Fabio Estevam wrote:
On Mon, Jul 30, 2012 at 3:53 PM, Bill<bsou...@techsi.com> wrote:
Progress! I switched all the references from ttyAMA0... to ttyAM0. Also
changed netargs too. Now it starts to boot linux but hangs right after the
line of:
mxs_cpu_init: cpufreq init finished.
Please remove cpufreq from your kernel config.
You can use this patch:
https://github.com/Freescale/meta-fsl-arm/blob/denzil/recipes-kernel/linux/linux-imx-2.6.35.3/mx28-removecpufreq.patch
Regards,
Fabio Estevam
--
William (Bill) L. Sousan, Ph.D.
(w) 402.331.4977 ext. 4002
bsou...@techsi.com
Technical Support Inc.
11253 John Galt Blvd
Omaha, NE 68137
www.techsi.com
8(a) SDB Certified, ISO 9001:2008
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot