This commit enables NAND support on the Tamonten Evaluation Carrier and
adds the corresponding device tree nodes. Furthermore, the U-Boot
environment can now be stored in NAND.

Signed-off-by: Thierry Reding <thierry.red...@avionic-design.de>
---
 board/avionic-design/dts/tegra20-tec.dts | 11 +++++++++++
 include/configs/tec.h                    | 12 ++++++++++--
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/board/avionic-design/dts/tegra20-tec.dts 
b/board/avionic-design/dts/tegra20-tec.dts
index 9faebd8..bb3851b 100644
--- a/board/avionic-design/dts/tegra20-tec.dts
+++ b/board/avionic-design/dts/tegra20-tec.dts
@@ -55,4 +55,15 @@
        usb@c5004000 {
                status = "disabled";
        };
+
+       nand-controller@70008000 {
+               nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */
+               nvidia,width = <8>;
+               nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+
+               nand@0 {
+                       reg = <0>;
+                       compatible = "hynix,hy27uf4g2b", "nand-flash";
+               };
+       };
 };
diff --git a/include/configs/tec.h b/include/configs/tec.h
index 9b3f88d..54fcd41 100644
--- a/include/configs/tec.h
+++ b/include/configs/tec.h
@@ -45,14 +45,22 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
-#define CONFIG_ENV_IS_NOWHERE
-
 /* SD/MMC */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_TEGRA_MMC
 #define CONFIG_CMD_MMC
 
+/* NAND support */
+#define CONFIG_CMD_NAND
+#define CONFIG_TEGRA_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#define CONFIG_SYS_NAND_BASE           TEGRA20_NAND_BASE
+
+/* Environment not stored */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET              (SZ_512M - SZ_128K) /* 128K sector size 
*/
+
 /* USB host support */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_TEGRA
-- 
1.7.11.3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to