Add a flash node to handle the NAND, including memory timings and
page / block size information.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v2:
- Update NAND binding to add "nvidia," prefix
Changes in v3:
- Add reg property for unit address (should be used for chip select)
- Update fdt binding to make everything Nvidia-specific
Changes in v4:
- Remove fdt bindings related to page structure
board/nvidia/dts/tegra20-seaboard.dts | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/board/nvidia/dts/tegra20-seaboard.dts
b/board/nvidia/dts/tegra20-seaboard.dts
index 3352539..25a63a0 100644
--- a/board/nvidia/dts/tegra20-seaboard.dts
+++ b/board/nvidia/dts/tegra20-seaboard.dts
@@ -153,4 +153,14 @@
0x1f04008a>;
linux,fn-keymap = <0x05040002>;
};
+
+ nand-controller@70008000 {
+ nvidia,wp-gpios = <&gpio 59 0>; /* PH3 */
+ nvidia,width = <8>;
+ nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+ nand@0 {
+ reg = <0>;
+ compatible = "hynix,hy27uf4g2b", "nand-flash";
+ };
+ };
};
--
1.7.7.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
